Overview
FARUI FR-1240-1000A Constant Temperature and Humidity Incubator can be used for bacterial fostering, breeding, fermentation and other thermostatic experiments and fostering in scientific research and industrial production departments such as **, industrial production, biochemistry and agricultural science. The equipment adopts large LCD display microcomputer intelligent adjustment technology for temperature control, with automatic display of measured temperature and set temperature at the same time, PID adjustment, thermostatic timing and self-tuning functions, high temperature control accuracy, strong anti-interference ability, easy to operate.
Features
1. Cold rolled steel plate surface electrostatic spraying process, liner is stainless steel, insulation layer is formed by polyester foam, transparent window with double-decked Hollow Glass to ensure insulation performance.
2. Adopt "zero-crossing" touchless point switching circuit technology to realize pulse width adjustment heating and cooling, the temperature control fluctuation range is less than 0.5 ° C, and the internal unevenness is about 1.0 ° C.
3. Controlled by microprocessor, with functions such as monitoring, temperature control and protection, the lighting in the box can observe the foster.
4. The brushed stainless steel liner is easy to clean, and the shelf can be set and adjusted arbitrarily.
5. The back of the box is provided with an exhaust hole, and the bottom is provided with a ventilation hole. The gas volatilized by the experimental items can be discharged from the back.
Principle
The principle of air circulation is adopted to make the temperature distribution in the box more uniform and the temperature rise more stable. Stop humidification during heating to ensure stable temperature and humidity control.
Applications
Industrial production, biochemistry, agricultural sciences
Steps
1. Before use, place the ultrasonic Nebulizer next to the machine, add water, connect the gasification pipe, and plug the ultrasonic Nebulizer power cord into the three-wire socket behind the right side of the box.
2. Ensure Ambient Temperature at 10-30 ℃, no strong corrosive gas, well ventilated, relative humidity below 85%, Power Supply 220V +/- 10%, 50HZ capacity not less than 1KW, with good grounding wire.
Notice
• When using the humidifier, you should pay attention to adding water in time, and add water once every 1-2 days according to the humidity requirements to prevent damage. When adding water, remove the humidifier power plug, remove the water storage tank, turn it up and unscrew the water sealing port counterclockwise, add water, tighten the sealing port, put it on the humidifier, and press the humidifier power supply.
• After the equipment lands, if the ground is uneven, it should be leveled.
The general motion of the equipment should be moved in parallel, and the inclination in either direction should be less than 45 degrees.
• During normal operation, the placement of the contents in the box should not affect the air circulation to ensure uniform temperature in the box.
• The wall liner and equipment surface should be wiped frequently to keep clean.
If it is not used for a long time, the power cord should be removed to prevent the equipment from being charged and injuring people, and it should be run regularly (usually in the first quarter) for 2-3 days according to the conditions of use to drive away moisture from the electrical components and avoid damage to the relevant devices.
