Overview
The HZLB LGZD-580B cryogenic light chamber is a smart foster device that uses microcomputer program control to accurately simulate temperature and light changes during the day and night, providing a sufficient and stable environment for plant growth and other research. The device uses Air-Cooled refrigeration technology, Temperature range, stable operation, suitable for experimental scenarios that require continuous cycle work.
Features
1. Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature changes or provide stable Illuminant.
2. 30-stage programs can be set, each time adjustable from 1 to 99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure the safety of the experiment.
6. Can be equipped with CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator precisely adjusts the Compressor refrigeration system and heating system according to the preset program instructions through the microcomputer Control system to achieve precise control of the temperature in the box. At the same time, the Control system adjusts the luminance level of the built-in Illuminant to achieve multi-level adjustable light intensity, so as to simulate the natural light environment or provide stable light intensity of specific Light intensity to create controllable conditions for biological fostering.
Applications
Plant growth research, seed germination experiment, microbial fostering, tissue fostering, environment simulation test
Standards
Domestic patented products
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50HZ power supply.
2. Through the microcomputer control panel, set the required temperature program segments (a total of 30 segments can be set, each segment can be set for 1-99 hours) and corresponding lighting parameters.
3. Start the equipment, the Compressor and lighting system start to work, and the equipment enters the continuous cycle operation mode.
4. During the experiment, the environment status in the box can be viewed through the observation window or data monitoring system.
5. After the experiment, turn off the power supply of the equipment, and remove the Shelf bracket if necessary to clean the box.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
• Please use the specified power supply (AC220V 50HZ) and ensure good grounding.
• When setting the program, please pay attention to the reasonable configuration of temperature and lighting parameters to avoid exceeding the working interval of the equipment.
• When the equipment is running, do not open and close the box door frequently, so as not to affect the internal environment Stability.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the equipment alarms, please check and troubleshoot immediately (such as overheating) to ensure safety before running.
• Optional CO2 systems require professional installation and commissioning.
