Overview
The HZLB LGZD-250A cryogenic light chamber is a smart foster device that uses microcomputer program control to precisely control temperature and light, simulate day and night temperature changes or provide stable growth Illuminant. It is designed to provide a controlled cryogenic light foster environment for plants, microorganisms, etc., and is suitable for scientific research, teaching and production.
Features
1. Microcomputer program control temperature and Illumrination degree, can simulate day and night temperature changes or provide stable Illuminant.
2. 30-stage programs can be set, each with a time range of 1-99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Optional CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator precisely adjusts the Compressor refrigeration system and heating system according to the preset program instructions through the microcomputer Control system to achieve precise control of the temperature in the box. At the same time, the Control system adjusts the built-in Illuminant system to realize the programmed control of the light intensity and period, so as to create the required temperature and light environment for the foster in the box.
Applications
Plant fostering research, seed germination experiment, microbial fostering, tissue fostering, bioengineering, agricultural research, teaching experiment
Standards
The data did not mention specific compliance criteria
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Set the required temperature program (within the range of -15 to 50 ° C) and lighting program (0-5000LX, three levels adjustable) through the microcomputer control panel.
3. According to the experimental requirements, up to 30 programs can be set, and the running time of each program can be set.
4. Put the foster object into the box, close the box door, and start the equipment to start running.
5. The equipment enters the automatic operation state, and the temperature and lighting are controlled according to the program.
6. When the experiment is over or needs to be interrupted, stop running through the control panel and take out the sample.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
Make sure to use an AC220V 50Hz power supply and ground it reliably.
• Do not switch on and off frequently to ensure the service life of the Compressor.
• When cleaning the liner, please disconnect the power first and wipe it with a soft cloth to avoid the use of corrosion cleaners.
• During operation, do not open the door frequently, so as not to affect the temperature and light Stability in the box.
• Pay attention to the equipment alarm prompt. If the over-temperature alarm system starts-up, please check and troubleshoot in time.
• If the CO2 system is optional, follow the relevant instructions for installation and operation.
