Overview
The HZLB LGZD-250B cryogenic light chamber is a smart foster device that uses microcomputer program control to accurately simulate temperature and light changes during the day and night, providing a controlled environment for plant growth. With a volume of 250L and a mirrored stainless steel liner, it is designed for easy cleaning and supports long-term continuous and stable operation.
Features
1. Microcomputer program control temperature and Illumrination degree, can simulate day and night temperature changes or provide stable Illuminant.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean in the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure the safety of the experiment.
6. Can be equipped with CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator precisely regulates the Compressor refrigeration system and lighting system through a microcomputer program Control system to achieve the set temperature and lighting program. It uses Air-Cooled technology for temperature control and provides an adjustable lighting environment through vertical lighting to simulate or create specific plant growth conditions.
Applications
Plant fostering research, seed germination experiment, bioengineering, agricultural research
Standards
Domestic patented products
Steps
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC220V 50Hz power supply.
2. Set the required temperature program and lighting program through the microcomputer control panel.
3. Shelf brackets can be loaded and unloaded according to experimental needs, and samples to be fostered can be placed.
4. Start the device, and the device will automatically run according to the set program to achieve continuous cycle operation.
5. During operation, parameters can be monitored through the panel, and the overheating of the equipment will automatically alarm and interrupt.
Notice
Equipment should be placed at the required Ambient Temperature (+ 5~ 30 ℃).
• Please use the specified power supply (AC220V 50Hz).
• Before running, make sure the Program settings are correct, especially the temperature limit values.
• When cleaning the liner, pay attention to the safety of loading and unloading Shelf brackets.
• If a CO2 system is added, it needs to be operated and maintained according to relevant instructions.
• When the equipment alarms, please check and troubleshoot in time.
