Overview
The HZLB LGZD-350B cryogenic light chamber is a smart foster device that uses microcomputer program control to precisely regulate temperature and light. It can simulate day and night temperature changes and provide a sufficient and stable Illuminant environment, suitable for plant growth, seed germination and other experimental studies that require light and temperature control. The equipment uses a brand Compressor to ensure long-term stable operation, and has an independent temperature limit alarm system to ensure experimental safety.
Features
1. The microcomputer program controls the temperature and Illumrination degree, which can simulate the temperature changes of day and night, and can also choose Illuminant with sufficient and stable growth environment.
2. 30 programs can be set, each with a time range of 1-99 hours, and different segmentation parameters can be set to meet the different parameters of plant growth.
3. Brand Compressor to ensure that the test equipment for a long time continuous operation, refrigerant (R134a), effective, low energy consumption, promote energy saving.
4. Mirror stainless steel liner, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. It is equipped with an independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents.
6. Can be added: with CO2 air inlet (to promote plant growth) and CO2 controller (imported infrared CO2 Sensor).
Principle
The incubator precisely sets and automatically adjusts the temperature and light in the box through a microcomputer program controller. The temperature control system monitors the temperature in the box through the Sensor and instructs the Compressor refrigeration or heating elements to operate to achieve the set Temperature range (-15~ 50 ° C) and accuracy (Fluctuation +/- 0.5 ℃~ +/- 1.0 ° C). The lighting system is illuminated vertically from both sides by an adjustable level of Illuminant (0-12000LX, adjustable in four stages) to simulate natural lighting conditions. The program can set different light and temperature combinations to simulate day and night cycles or meet the needs of specific growth stages.
Applications
Plant growth research, seed germination experiments, biological fostering, agricultural research
Standards
Domestic patented products
Steps
1. Place the device in a stable position in line with the working Ambient Temperature (+ 5~ 30 ℃), and connect the AC220V 50Hz power supply.
2. Set the required temperature program through the microcomputer control panel (a total of 30 segments can be set, each segment is 1-99 hours) and lighting program (0-12000LX, four-level adjustable).
3. Put the experimental samples into the box and make rational use of the Shelf bracket that can be freely loaded and unloaded.
4. Start the device, and the device will run automatically according to the set program, simulating day and night temperature and light changes.
5. During the experiment, the operation status can be monitored through the observation window and Control system.
6. After the experiment, turn off the power of the device and remove the sample.
7. When cleaning the box, remove the Shelf bracket and wipe the mirror stainless steel liner with a soft cloth.
Notice
Equipment should be placed in a well-ventilated room with an Ambient Temperature between + 5 and 30 ° C.
• Make sure to use an AC220V 50Hz power supply and ground it reliably.
• When the equipment is running, do not frequently open and close the box door, so as not to affect the Internal Temperature Humidity and Light Stability.
• When cleaning the liner, please cut off the power first, wipe it with a soft cloth, and avoid using corrosion cleaners.
• Pay attention to the independent temperature limit alarm function set by the equipment to ensure the safety of the experiment, but the user still needs to check the running status regularly.
• If you need to add a CO2 system, please consult a professional for installation and operation.
Equipment is designed to work in a continuous cycle, but it is recommended to shut down for maintenance after a long period of operation.
