Overview
The HZLB LGZD-800B cryogenic light chamber is a microcomputer program-controlled intelligent foster device that can precisely control temperature and light, simulate day and night temperature changes or provide stable Illuminant, suitable for scientific research such as plant growth. It uses brand Compressor and high-efficiency refrigerant to ensure long-term stable and energy-saving operation of the equipment.
Features
1. Microcomputer program control temperature and Illumrination degree, can simulate day and night temperature changes or provide stable Illuminant.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the requirements of plant growth parameters at different stages.
3. Adopt brand Compressor and high-efficiency refrigerant (R134a) to ensure long-term continuous and stable operation with low energy consumption.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Can be equipped with CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
Control system of the microcomputer program, the Compressor refrigeration system and lighting system for precise regulation, to achieve the set temperature and lighting program. It can simulate the natural environment of day and night temperature and light changes, or maintain constant growth conditions, to provide a controlled environment for the foster.
Applications
Plant growth research, seed germination test, biological fostering, environment simulation experiment
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Set the required temperature program (-15~ 50 ° C) and lighting program (0-12000LX, four-level adjustable) through the microcomputer control panel.
3. Up to 30 programs can be set, with a setting time range of 1-99 hours per session.
4. Place the foster on the Shelf that can be freely loaded and unloaded in the box, and close the box door.
5. Start the device, and the device will work continuously according to the set program.
6. After the experiment, take out the sample and remove the Shelf bracket for cleaning in the box if necessary.
Notice
Equipment should be placed in a temperature + 5~ 30 ℃ environment.
Make sure the power supply is AC220V 50Hz.
• Do not frequently open and close the box door during operation, so as not to affect the Internal Temperature Humidity and Light Stability.
• When cleaning the liner, pay attention to wipe the mirror stainless steel surface with a soft cloth to avoid scratches.
• Pay attention to the independent temperature limit alarm function set by the device. It will be automatically interrupted when it exceeds the temperature. You need to check the reason before restarting.
• If a CO2 system is added, follow the relevant instructions for operation and maintenance.
