Overview
The HZLB LGZD-1500A cryogenic light chamber is a smart foster device with a volume of 1500L and is controlled by a microcomputer program to precisely regulate temperature and light. It can simulate day and night temperature changes and provide a stable and sufficient Illuminant environment for various experiments that require controlled growth conditions. The device uses Air-Cooled refrigeration technology, which has a wide Temperature range and can operate continuously for a long time.
Features
1. Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature changes or provide stable Illuminant.
2. 30-stage programs can be set, each time adjustable from 1 to 99 hours, to meet the requirements of plant growth parameters at different stages.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous operation, effective and low energy consumption.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Optional CO2 inlet and imported infrared CO2 controller to promote plant growth.
Principle
The incubator integrates the Compressor refrigeration system, heating system and lighting system through a microcomputer Control system to achieve accurate adjustment of temperature and light in the box. The system can execute preset multi-stage programs to automatically switch temperature and light conditions at different time periods to simulate changes in the natural environment. An independent safety alarm system monitors the status of the box in real time to ensure safe operation.
Applications
Plant growth research, seed germination experiment, biological fostering, environment simulation test
Standards
Domestic patented products
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Set the required temperature program and lighting parameters through the microcomputer control panel.
3. After confirming that the parameters are set correctly, start the device and start running.
4. The equipment will automatically control the temperature and lighting according to the set program, and perform continuous cycle operation.
5. After the experiment, power off the equipment and perform necessary cleaning and maintenance.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
• Please use the specified AC220V 50Hz power supply and ensure good grounding.
When setting the program, please carefully check the temperature, lighting and time parameters of each section.
• During operation, pay attention to observe the status of the equipment, and check the cause in time when the alarm system is triggered.
• When cleaning the liner, remove the Shelf bracket and wipe it with a soft cloth to avoid the use of corrosion cleaners.
• If you need an optional CO2 system, please ensure that the intake air is connected correctly and the controller is operated by a professional.
