Overview
The HZLB LRGD-580A low temperature light chamber is an intelligent low temperature Artificial climate box with a volume of 580L. It is controlled by a microcomputer program, which can accurately simulate the temperature and Humidity changes during the day and night, and provide a sufficient and stable light environment. It is suitable for experiments such as plant fostering that require precise environment control. The equipment adopts Air-Cooled refrigeration technology, which has a wide Temperature range and can operate continuously and stably for a long time.
Features
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, the temperature limit is automatically interrupted to ensure the safety of the experiment.
6. It can be equipped with a CO2 inlet and an imported infrared CO2 controller to promote plant growth.
Principle
The incubator coordinates the operation of the refrigeration/heating system, the humidification system and the lighting system according to the preset program instructions through the microcomputer Control system. The Compressor drives the refrigeration cycle to achieve cooling, the heater is responsible for heating up, and the humidifier adjusts the Humidity, so as to precisely create the required temperature and Humidity environment in the box. At the same time, the vertical lighting system on both sides provides adjustable lighting conditions to simulate the natural light environment to meet the needs of plants or experimental samples for environment parameters at different growth stages.
Applications
Plant fostering, seed germination, tissue fostering, microbial fostering, insect feeding, biological product preservation and other scientific research and production fields that require precise control of temperature, Humidity and light.
Standards
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
Steps
1. Place the equipment in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Open the box door and install or adjust the internal Shelf bracket as needed.
3. Close the box door and set the required temperature, Humidity, Illumrination degree and time program through the microcomputer control panel.
4. After confirming that the parameters are set correctly, start the device to run.
5. The device will run automatically according to the set program, and real-time parameters can be observed through the panel.
6. After the experiment, turn off the equipment according to the program, disconnect the power supply, and perform necessary cleaning and maintenance.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
Make sure to use an AC220V 50Hz power supply and ground it reliably.
• When the equipment is running, do not open and close the box door frequently, so as not to affect the internal environment Stability.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the device alarms, please check and troubleshoot immediately to ensure safety before use.
• When not in use for a long time, disconnect the power supply, wipe the box clean, and keep drying.
Before performing maintenance or moving equipment, be sure to cut off the power supply.
