Overview
The HZLB LRGD-580B cryogenic light chamber is a microcomputer-controlled intelligent artificial climate device that accurately simulates day and night temperature, Humidity and light changes, providing controllable environmental conditions for plant growth, seed germination and other research. It uses Air-Cooled refrigeration technology, Temperature range (-20 ℃ to 50 ℃), and has a four-stage adjustable two-sided vertical lighting system up to 12000LX, suitable for continuous experimental work requiring low temperature, light and Humidity control.
Features
1. Microcomputer program control Temperature, Humidity, Illumrination degree, can simulate day and night environment changes or provide stable Illuminant.
2. Up to 30 programs can be set, each time adjustable from 1 to 99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner design, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Optional CO2 inlet and imported infrared CO2 controller to promote plant growth.
Principle
The incubator regulates the operation of the refrigeration system, humidification system and lighting system according to the preset program or set value through the microcomputer controller. The Compressor drives the refrigeration cycle to achieve precise temperature control, the humidification system maintains the Humidity in the box, and the Illuminant on both sides provides a scalable light to create a temperature, Humidity and light environment in a closed box that meets the experimental requirements.
Applications
Plant growth research, seed germination test, biological fostering, agricultural research
Standards
Humidity uniformity meets national standards
Steps
1. Place the equipment in a working environment that meets the requirements (temperature + 5~ 30 ° C) and connect it to an AC220V/50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity, Illumrination degree and time program (up to 30 segments).
3. Put the experimental samples into the box and place them reasonably to ensure the uniformity of the environment.
4. Start the device and run the preset program.
5. During the experiment, real-time parameters can be monitored through the panel, and samples can be taken out after operation.
6. After the experiment is completed, turn off the power supply and clean the cabinet liner if necessary.
Notice
Equipment should be placed in a well-ventilated place with suitable Ambient Temperature (+ 5~ 30 ℃).
• Please use the specified power supply (AC220V 50Hz) and ensure good grounding.
• When loading samples, do not block the air duct to ensure a uniform environment in the box.
• During operation, do not switch the box door frequently, so as not to affect the accuracy of temperature control and humidity control.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the equipment alarms, please check and troubleshoot immediately (such as overheating) to ensure safety before running.
• Optional CO2 systems require professional installation and commissioning.
