Overview
HZLB LRGD-350A low temperature light chamber is a microcomputer program-controlled intelligent artificial climate device, which can accurately simulate the temperature and Humidity changes during the day and night, and provide a sufficient and stable light environment. The equipment adopts Air-Cooled refrigeration technology, Temperature range -15~ 50 ℃, volume 350L, suitable for experiments and studies that require precise environment control such as plant growth and seed germination.
Features
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant.
2. 30 programs can be set, each running for 1-99 hours, to meet the parameter requirements of different stages of plant growth.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Can be equipped with CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator coordinates the operation of the refrigeration/heating system, the humidification system and the lighting system according to the preset program instructions through a microcomputer Control system. The Compressor and Air-Cooled technology implementation precisely control the temperature in the box, the humidification device adjusts the Humidity level, and the multi-stage adjustable Illuminant provides vertical lighting, which together create a programmable, stable temperature, Humidity and lighting environment in the closed stainless steel box to simulate natural or specific growth conditions.
Applications
Plant growth research, seed germination experiments, biological fostering, agricultural research
Standards
Humidity uniformity meets national standards
Steps
1. Place the equipment in a working environment of + 5~ 30 ° C and connect the AC220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity, Illumrination degree and time program (up to 30 segments).
3. Put the experimental samples into the box and place them reasonably to ensure a uniform environment.
4. Start the device, and the system will automatically run according to the set program, simulating day and night changes or maintaining constant conditions.
5. During the experiment, real-time parameters can be monitored through the panel, and samples can be taken out after operation.
6. After the experiment is completed, disconnect the power supply and remove the Shelf if necessary to clean the box.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
• Please use the specified power supply (AC220V 50Hz) and ensure good grounding.
• When loading samples, do not block the air duct to ensure a uniform environment in the box.
• During operation, do not open the door frequently, so as not to affect the accuracy of temperature control and humidity control and equipment Stability.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the equipment alarms, please check and troubleshoot immediately (such as overheating) to ensure safety before running.
• Optional CO2 systems require professional installation and commissioning.
