Overview
The HZLB LRGD-800A low temperature light chamber is an intelligent Artificial climate box with a volume of 800L. It is controlled by a microcomputer program, which can accurately simulate the temperature and Humidity changes during the day and night, and provide a sufficient and stable light environment, suitable for plant growth and other research. The equipment uses a mirrored stainless steel liner, which is designed for easy cleaning and supports long-term continuous and stable operation.
Features
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant.
2. 30 programs can be set, each running for 1-99 hours, to meet the requirements of plant growth parameters at different stages.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation of the equipment.
4. Mirror stainless steel liner, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean in the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. Optional CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator integrates the Compressor, humidification/dehumidification system and lighting system through a microcomputer Control system. The system precisely adjusts the temperature, Humidity and light intensity and time in the box according to the preset program, so as to simulate the required day and night alternation or constant climate environment in a confined space, providing controllable conditions for biological fostering.
Applications
Plant growth research, seed germination, tissue fostering, microbial fostering, environment simulation experiment
Standards
Humidity uniformity meets national standards
Steps
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity, Illumrination degree and time program (up to 30 segments).
3. Place the sample to be fostered on the Shelf and close the box door.
4. Start the equipment and start a continuous cycle of operation.
5. During the experiment, the running status can be monitored through the panel, and the over-limit alarm system will automatically ensure safety.
6. After the experiment, remove the sample, disconnect the power supply, and clean the stainless steel liner if necessary.
Notice
Equipment should be placed at the required Ambient Temperature (+ 5~ 30 ℃).
Please use the specified power supply (AC220V 50Hz) and ensure good grounding.
When setting up the program, pay attention to the time range of 1-99 hours per period.
● Shelf holder can be removed for operation when cleaning liner.
Pay attention to the equipment alarm prompt, and check and troubleshoot after the over-temperature protection is started.
The optional CO2 system needs to be installed and configured separately.
● When the equipment is running, do not switch the box door frequently to avoid affecting the internal environment Stability.