Overview
The HZLB LRGD-800B cryogenic light chamber is an intelligent Artificial climate box with a volume of 800L. The product is controlled by a microcomputer program, which can accurately simulate the temperature and Humidity changes during the day and night, and provide a sufficient and stable lighting environment. It is suitable for fostering experiments that require precise environment control. It works in a continuous cycle and is designed for long-term stable operation.
Features
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant.
2. 30 programs can be set, each running for 1-99 hours, to meet the parameter requirements of different stages of plant growth.
3. The brand Compressor is used, and the refrigerant is R134a to ensure the continuous, efficient and low energy consumption operation of the equipment for a long time.
4. The liner is made of mirror stainless steel, with four corners and a half arc transition, and the Shelf bracket can be freely loaded and unloaded, which is convenient for cleaning in the box.
5. Equipped with an independent temperature limit alarm system, overheating is automatically interrupted to ensure experimental safety.
6. The light intensity is 0-12000LX, adjustable in four stages, and the two-sided vertical light mode is adopted.
7. Optional CO2 inlet and imported infrared CO2 Sensor controller to promote plant growth.
Principle
The incubator integrates and manages environment parameters such as temperature, Humidity and light through a microcomputer Control system. The system drives the Compressor cooling or heating elements to work according to a preset program to precisely control the temperature in the box; the Humidity in the box is adjusted through the Humidity Control system; at the same time, the lighting system provides different intensities and cycles of light according to the setting, so as to simulate the required growth climate environment in the box.
Applications
Plant fostering research, seed germination experiment, biological product preservation, environment simulation experiment
Standards
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
Steps
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity and lighting program (up to 30 segments).
3. Install or adjust the Shelf bracket in the box according to the experimental requirements.
4. After placing the experimental sample, close the box door and start the equipment to run.
5. The equipment will automatically control the environment parameters according to the set program, and can work continuously.
6. After the experiment, turn off the equipment, remove the sample, and perform cleaning and maintenance in the box.
Notice
● Equipment should be placed in a well-ventilated place with Ambient Temperature + 5~ 30 ° C.
● Power supply voltage is AC220V 50Hz before use.
● When cleaning the box, please pay attention to the safety of loading and unloading the Shelf bracket to avoid scratches.
● During operation, do not switch the box door frequently to avoid affecting the internal environment Stability.
● Pay attention to the independent temperature limit alarm function of the device. If the alarm is triggered, you need to check the reason before continuing to use it.
If a CO2 system is optional, it is necessary to install and operate it according to the relevant instructions.
