Overview
HZLB LRGD-250Y Low Temperature Artificial climate box (Cold Illuminant) is an intelligently controlled foster device with a volume of 250L. It is controlled by a microcomputer program, which can accurately simulate the temperature and Humidity changes of day and night, and provides a stable and sufficient light environment, suitable for plant growth and other research. The equipment adopts Air-Cooled refrigeration technology, Temperature range -15~ 50 ℃, Humidity Control Range 50-95% RH, and is equipped with an overhead LED cold Illuminant, light intensity 0-15000LX.
Features
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant.
2. Multi-stage programs can be set (optional), each time range is 1-99 hours, to meet the requirements of different growth stages.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous and stable operation with low energy consumption.
4. Observation window with anti-fog function and lock, liner is mirror stainless steel, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean.
5. Using overhead LED cold Illuminant, the beam of light does not produce heat, extracting Light spectrum that is conducive to plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant has the characteristics of miniaturization, planarization and strong designability, which can realize the free arrangement of point formation and multi-color light.
7. LED Illuminant has extremely low energy consumption (about 80% lower than ordinary Illuminant), combined with foam insulation technology, which greatly reduces the cost of use, and extends the warranty period of the whole machine to two years.
8. LED Illuminant has a long service life (more than 50,000 hours), high photoelectric conversion efficiency, Response Time of nanoseconds, and uniform lighting.
9. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a box of dual-use (when the temperature control needs to be turned off).
10. Top-mounted planar lighting ensures uniform absorption of Illuminants by the foster and maintains the conformity of experimental results.
11. Horizontal circulating air design to ensure uniform temperature across layers.
12. Adjustable shelf, Illuminant height can be adjusted according to crop growth, high internal space utilization.
13. It is equipped with an independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure the safety of the experiment.
14. Changes in various parameters can be recorded, and data can be downloaded and stored through a U disk; optional RS485 interface can be connected to a computer for synchronous monitoring and data recording.
15. It can be equipped with a CO2 air inlet and an imported infrared CO2 controller (optional) to promote plant growth.
16. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The device integrates the Compressor, refrigeration system, humidification system and LED Illuminant through a microcomputer Control system. The system precisely adjusts the temperature and Humidity in the box according to the set program, and provides specific Light spectrum and intensity through the top LED cold Illuminant matrix. The horizontal circulating air system ensures that the temperature and Humidity in the box are evenly distributed. When it is necessary to simulate the alternation of day and night, the program can control the light, temperature and Humidity to cycle according to the set period.
Applications
Plant growth research, seed germination test, biological fostering, environment simulation experiment
Standards
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
Steps
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC 220V 50Hz power supply.
2. Set the required temperature, Humidity, light intensity and program parameters through the microcomputer control panel.
3. Put the foster objects into the box, and adjust the placement height by using the adjustable shelf.
4. Start the device, the device will run automatically according to the set program, simulating the required climate conditions.
5. You can view the internal situation through the observation window, and download or record data during operation (optional function).
6. After the experiment, take out the foster, turn off the power, and clean the box.
Notice
Equipment should be placed at the required Ambient Temperature (+ 5~ 30 ℃).
• Power supply voltage is AC 220V 50Hz before use.
• Do not switch equipment frequently to ensure the service life of the Compressor.
• When cleaning the liner, please disconnect the power first and wipe it with a soft cloth.
• If the temperature limit alarm system is selected, please do not change or Shielding its function at will.
• Accessories such as optional CO2 controllers, please follow the relevant instructions to install and use.
• When the equipment is not used for a long time, the power supply should be disconnected and the box should be kept drying.
