Overview
The HZLB LRGD-350Y Low Temperature Artificial climate box (Cold Illuminant) is a microcomputer-controlled intelligent foster device that accurately simulates day and night temperature, Humidity and light changes, providing a stable and controllable environment for plant growth research. The device uses LED cold Illuminant technology, which has the characteristics of low energy consumption, long life, uniform lighting, and is equipped with stainless steel liners and adjustable shelves, suitable for long-term continuous operation experimental needs.
Features
1. Microcomputer program control Temperature, Humidity, Illumrination degree, can simulate day and night environment changes.
2. 30-stage program can be set, each time range is 1-99 hours (optional), to meet the needs of different growth parameters.
3. Use brand Compressor and R134a refrigerant to ensure long-term continuous operation, high efficiency and energy saving.
4. With anti-fog observation window and door lock, the interior is mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean.
5. Using overhead LED cold Illuminant (Color temperature 4000K), the beam of light does not produce heat, extracts the Light spectrum favorable for plant growth, and the energy consumption is extremely low (about 80% lower than ordinary Illuminant).
6. LED Illuminant has a lifespan of more than 50,000 hours, fast Response speed (nanosecond level), high photoelectric conversion efficiency, and uniform lighting.
7. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
8. Horizontal circulating air design to ensure uniform temperature across layers.
9. Illuminant height adjustable with crop growth.
10. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
11. Parameter changes can be recorded, and the data can be downloaded through a U disk or connected to a computer monitoring through an RS485 interface (optional).
12. Can be equipped with CO2 intake and controller (imported infrared CO2 Sensor) to promote plant growth.
13. Each layer can be equipped with LED Illuminants of different Colors (optional).
14. Adopt foaming insulation technology to further reduce energy consumption, with a low accident rate and an extended warranty period of up to two years.
Principle
The climate box precisely adjusts the operating status of the Compressor, humidification/dehumidification system and LED Illuminant through a microcomputer Control system to achieve programmatic control of the temperature, Humidity and light intensity in the box. The horizontal circulating air system ensures that the air in the box flows evenly and maintains the same environment parameters in all layers. LED Cold Illuminant provides specific Light spectrum illumination without generating additional heat, combined with thermal insulation technology, to maintain a stable and energy-efficient artificial climate environment.
Applications
Plant growth research, seed germination test, biological fostering, environment simulation experiment
Standards
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity, light intensity and time program.
3. Place the foster on the adjustable shelf and adjust the Illuminant height as needed.
4. Start the equipment, and the system starts to run according to the set program to simulate the climate environment.
5. You can view the internal situation through the observation window, and download or monitor the experimental data during operation (optional function).
6. After the experiment, turn off the equipment, remove the sample, and clean the box.
Notice
* Equipment should be placed in a well ventilated place with Ambient Temperature between + 5 and 30 ° C.
Please use the specified AC220V 50Hz power supply and ensure good grounding.
* The equipment door is locked, please keep the key properly after use.
* When cleaning the liner, remove the Shelf holder and wipe it with a soft cloth.
* If you choose a temperature limit alarm system, do not turn off this function at will.
When not in use for a long time, please disconnect the power supply.
When performing maintenance or troubleshooting, please refer to the data recorded by the equipment or contact a professional.
* Optional functions (such as multi-segment program, CO2 control, Interface, different Color Illuminants, etc.) need to be clear when booking.
