Overview
The HZLB LRGD-450Y Low Temperature Artificial climate box (Cold Illuminant) is an intelligent device controlled by a microcomputer program, which can accurately simulate the temperature and Humidity changes during the day and night, and provide a stable and controllable LED cold Illuminant lighting environment. The device has a volume of 450L and uses a mirror stainless steel liner. It has the ability to work in continuous cycles. It is suitable for scientific research and production fields such as plant fostering and seed germination that require precise environment control.
Features
1. Microcomputer program control Temperature, Humidity, Illumrination degree, can simulate day and night environment changes.
2. 30 programs can be set, each setting time range is 1-99 hours (optional), to meet the requirements of different growth stage parameters.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term stable operation and low energy consumption.
4. Equipped with a lock anti-fog observation window, the interior is mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean.
5. Using overhead LED Cold Illuminant, the beam of light does not generate heat, extracting Light spectrum conducive to plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant has the characteristics of miniaturization, planarization and strong designability, which can realize random arrangement of point formation and free combination of multi-color light.
7. LED Illuminant has extremely low energy consumption, about 80% lower than ordinary Illuminant. Combined with foam insulation technology, it significantly reduces the cost of use, and the warranty period of the whole machine is extended to two years.
8. Illuminant has a service life of more than 50,000 hours, high photoelectric conversion efficiency, and a Response Time of nanoseconds to ensure uniform light coverage.
9. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a box of dual-use (when the temperature control needs to be turned off).
10. Top-mounted planar lighting ensures uniform absorption of Illuminants by the foster and maintains the conformity of experimental results.
11. Horizontal circulating air design to ensure uniform temperature across layers.
12. Illuminant height adjustable shelf according to crop growth.
13. It is equipped with an independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure the safety of the experiment.
14. Changes in various parameters can be recorded, and data can be downloaded and stored through a U disk. Optional RS485 interface can be connected to a computer for synchronous monitoring and data recording.
15. It can be equipped with a CO2 inlet and an imported infrared CO2 controller to promote plant growth.
16. LED Illuminants of Different Colors are available for each layer.
Principle
Controlled by a microcomputer system, the equipment precisely adjusts the Compressor's cooling, heating and humidification systems to achieve the set temperature and Humidity range. At the same time, the overhead LED Cold Illuminant Array provides a stable, uniform and suitable light spectrum environment, simulating the natural light cycle. Horizontal circulating air system ensures that the temperature and Humidity are evenly distributed in all areas of the box, thus creating a controlled and consistent artificial climate environment for the internal foster.
Applications
Plant fostering, seed germination, biological research, agricultural research, environment simulation experiment
Standards
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
Steps
1. Place the device in a working environment (temperature + 5~ 30 ° C) that meets the requirements, and connect the AC220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature, Humidity and lighting program (up to 30 segments can be set).
3. Install or adjust the height of the adjustable shelf as needed.
4. Put the foster in the box and close the locked box door.
5. Start the device and the system will run automatically, simulating the set climate conditions.
6. The internal situation can be viewed through the observation window, and the recorded data can be downloaded through the computer interface (optional) or U disk during operation.
7. After the experiment, take out the foster and turn off the power of the equipment.
8. Shelf holder can be removed to clean liner when needed.
Notice
Equipment should operate at + 5~ 30 ℃ Ambient Temperature.
Make sure the power supply is AC220V 50Hz.
• Please confirm that each parameter is set correctly before use.
• Pay attention to the maintenance of door locks and observation windows to ensure that their sealing and anti-fog functions are normal.
When cleaning the liner, pay attention to safety and avoid damaging the stainless steel surface.
• Optional functions (such as multi-segment program timing, temperature limit alarm, CO2 control, RS485 interface, specific Color Illuminant) need to be confirmed at the time of purchase.
• When the equipment is running continuously, make sure that the surroundings are well ventilated.
• In case of failure or alarm, please refer to the instructions or contact a professional first.
