Please contact customer service
Using overhead LED cold Illuminant, the beam of light does not pRoduce heat and the Light spectrum is beneficial to plant growth, and the energy consumption is about 80% lower than that of ordinary Illuminant. 30 programs can be set, each 1-99 hours, to meet the needs of different growth stages.
Category : Environmental Chamber
Brand : hzlb
SKU : NB025230
Service :The delivery and service By NBCLab.Com
HZLB LRGD-800Y Low Temperature Artificial climate box (Cold Illuminant) is an intelligent foster device controlled by microcomputer program, which can accurately simulate day and night temperature, Humidity and light changes, providing a stable and controllable artificial climate environment for plant growth research. Its core adopts energy-efficient LED cold Illuminant and brand Compressor to ensure long-term stable and low energy consumption operation of the equipment.
1. Microcomputer program controls Temperature, Humidity, Illumrination degree, can simulate day and night changes or provide stable Illuminant. 2. Up to 30 programs can be set, each lasting 1-99 hours (optional), to meet the requirements of different growth stages. 3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous and stable operation, high efficiency and energy saving. 4. Equipped with a lock anti-fog observation window, the interior is mirror stainless steel liner, four corners arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean. 5. Using overhead LED cold Illuminant, the beam of light does not produce heat, Light spectrum is conducive to plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K. 6. LED Illuminant has the characteristics of miniaturization, planarization and strong designability, which can realize the free arrangement of point formation and multi-color light. 7. LED Illuminant has extremely low energy consumption (about 80% lower than ordinary Illuminant), combined with foam insulation technology, which greatly reduces the cost of use, and extends the warranty period of the whole machine to two years. 8. Illuminant has a lifespan of more than 50,000 hours, high photoelectric conversion efficiency, and a service life far exceeding that of ordinary Illuminants. 9. LED Response Time is nanosecond, integrated point array design to ensure uniform light coverage. 10. The light box can be easily replaced and can be used as a stand-alone Illuminant board. When the temperature demand is consistent, the temperature control can be turned off to achieve a box of dual-use. 11. Top-mounted planar illumination ensures uniform absorption of Illuminants by the foster and maintains the conformity of experimental results. 12. Horizontal circulating air design to ensure uniform temperature across layers. 13. Illuminant adjustable shelf, flexible interior space, adjustable height with crop growth. 14. Equipped with an independent temperature limit alarm system (optional), overheating automatically interrupts to ensure experimental safety. 15. Changes in various parameters can be recorded, and the data can be downloaded and stored through a U disk. Optional RS485 interface can be connected to a computer for synchronous monitoring and recording (optional). 16. Can be equipped with CO2 air inlet and imported infrared CO2 controller to promote plant growth (optional). 17. Each layer can be equipped with LED Illuminants of different Colors (optional).
The device precisely adjusts the working state of the Compressor, heater, humidifier and LED cold Illuminant through the microcomputer Control system to simulate the required temperature, Humidity and light environment. The horizontal circulating air system ensures uniform and stable climate in the box, while the LED cold Illuminant provides specific Light spectrum without generating additional heat, creating controlled growth conditions for plants.
Plant growth research, seed germination test, tissue fostering, insect feeding, microbial fostering, biological product preservation, environment simulation test
Humidity uniformity meets national standards (+/- 5% RH~ +/- 7% RH)
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC220V 50Hz power supply. 2. Through the microcomputer control panel, set the required temperature, Humidity and lighting program (up to 30 segments can be set). 3. According to the experimental needs, adjust the height of the adjustable shelf to fit the foster. 4. Place the foster and close the locked box door. 5. Start the equipment and the system will automatically operate to maintain the set climate conditions. 6. The internal condition can be monitored through the observation window, and the sample can be taken out after the experiment. 7. When necessary, download and store the experimental data through a U disk, or connect to a computer through the optional RS485 interface for monitoring and recording.
* Equipment should be placed at the required Ambient Temperature (+ 5~ 30 ℃). Make sure the power supply is AC220V 50Hz and is reliably grounded. Equipment is designed to work in a continuous cycle, do not start or stop frequently. * When cleaning the liner, pay attention to the safety of loading and unloading the Shelf bracket to avoid scratching the stainless steel surface. * Optional temperature limit alarm system, CO2 cgroup and multi-color Illuminant should be installed according to the instructions. * When not in use for a long time, please disconnect the power supply and clean and dry the box. * When troubleshooting or downloading data, follow the Operation Manual guidelines.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
