Overview
HZLB LGZD-580Y low temperature light chamber (cold Illuminant) is an intelligent device controlled by a microcomputer program, with precise temperature and Illumrination degree regulation functions. It uses LED cold Illuminant and air-cooled refrigeration technology to simulate day and night temperature changes and provide stable light, suitable for plant growth, seed germination and other experimental research.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30 programs can be set, each lasting 1-99 hours, to meet the requirements of different growth parameters.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term stable operation and low energy consumption.
4. Door with anti-fog observation window and lock, liner is mirror stainless steel, easy to clean.
5. Using overhead LED cold Illuminant, the beam of light does not produce heat, extracting beneficial light for plant growth, and the energy consumption is extremely low.
6. LED Illuminants have a lifespan of more than 50,000 hours and high photoelectric conversion efficiency.
7. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a box of dual-use.
8. Horizontal circulating air design to ensure uniform temperature in all layers.
9. Illuminant height can be adjusted according to crop growth.
10. Optional independent temperature limit alarm system, data recording and download function (U disk/RS485 interface).
11. Optional CO2 intake and controller, different layers of Color LED Illuminant.
Principle
The incubator precisely adjusts the Compressor cooling system and heating system through a microcomputer control system to achieve the set Temperature range (-20 ° C to 50 ° C). At the same time, the overhead LED cold Illuminant array provides the required light intensity (0-15000LX), the beam of light emitted by it does not generate additional heat, and the horizontal circulation air system ensures that the temperature and light in the box are evenly distributed to create a stable growth environment for the foster.
Applications
Plant growth studies, seed germination experiments, biological fostering, mass testing
Steps
1. Place the device in a stable position that meets the working Ambient Temperature (+ 5~ 30 ° C) and connect it to the AC220V power supply.
2. Through the microcomputer control panel, set the required temperature, Illumrination degree and program segment (up to 30 segments, each segment is 1-99 hours).
3. Place the foster on the adjustable shelf and adjust the Illuminant height as needed.
4. Close the box door, start the device, and the device will run automatically according to the set program.
5. You can check the internal situation through the observation window, and take out the foster after the operation.
6. If you need to record data, you can download it through a U disk or connect to a computer monitoring through the optional RS485 interface.
Notice
Equipment should be placed in a well-ventilated place with an Ambient Temperature between + 5 and 30 ° C.
• Please use the specified AC220V 50Hz power supply.
• Do not frequently open and close the box door during operation, so as not to affect the internal Humidity Stability.
• When cleaning the liner, please cut off the power first and wipe the mirror stainless steel surface with a soft cloth.
• If the temperature limit alarm system is selected, please ensure that its function is normal to ensure the safety of the experiment.
• When only using the lighting function, the temperature control switch can be turned off, and the light box can be used as a separate Illuminant board.
• When the equipment is not used for a long time, the power supply should be disconnected and the drying inside the box should be kept clean.
