Overview
HZLB LGZD-250Y low temperature light chamber (cold Illuminant) is an intelligent foster device controlled by microcomputer program, with precise temperature and light regulation functions. It adopts overhead LED cold Illuminant and Air-Cooled refrigeration technology, which can simulate day and night temperature changes and provide a stable and controllable growth environment for plants, microorganisms, etc., suitable for scientific research, teaching and production.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30 programs can be set, each lasting 1-99 hours, to meet the requirements of different growth parameters.
3. Using brand Compressor and environmentally friendly refrigerant (R134a), stable operation and low energy consumption.
4. With anti-fog observation window and lock, mirror stainless steel liner is easy to clean, and the shelf is adjustable and removable.
5. LED Cold Illuminant, beam of light does not produce heat, extracting beneficial light for plant growth, low energy consumption.
6. LED Illuminant can be designed, can realize the free combination of point array arrangement and multi-color light.
7. The whole machine adopts foaming insulation technology, which has low energy consumption and low accident rate. The warranty exemption period is extended to two years.
8. LED Illuminant has a lifespan of more than 50,000 hours and high photoelectric conversion efficiency.
9. Illuminant Response Fast (nanosecond level), integrated point array to ensure uniform light coverage.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted plane lighting to ensure that the foster is uniformly lit, and the experimental results are consistent.
12. Horizontal circulating air design to ensure uniform temperature across layers.
13. Illuminant height adjustable with crop growth.
14. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The incubator precisely adjusts the Compressor cooling system and heating system through the microcomputer Control system to achieve the set Temperature range (-15~ 50 ℃). At the same time, the overhead LED cold Illuminant array provides stable, uniform and adjustable light (0-15000LX), and the beam of light it emits does not generate additional heat. The horizontal circulating air system ensures that the air flow in the box is uniform, so that the temperature and light conditions are consistent within the foster space, thus simulating or creating a specific biological growth environment.
Applications
Plant fostering, seed germination, microbial fostering, tissue fostering, bioengineering, agricultural research, mass inspection, environment protection research, teaching experiment
Standards
The data did not mention specific standards
Steps
1. Place the device in a working environment of + 5~ 30 ° C and connect the AC 220V 50Hz power supply.
2. Through the microcomputer control panel, set the required temperature program and lighting parameters.
3. You can use the 30-segment programming function to set the temperature and light changes for different time periods.
4. Put the foster into the box and adjust the shelf height as needed.
5. Start the device and run Continuous Cycle Operating Mode.
6. Check the internal situation through the observation window. During operation, you can download data through a U disk or connect to an optional computer for monitoring.
Notice
* Equipment should be used at the specified Ambient Temperature (+ 5~ 30 ℃).
Make sure the power supply is AC 220V 50Hz and is reliably grounded.
* Do not switch frequently to ensure the service life of the Compressor.
* Do not use corrosion cleaners when cleaning liners.
If the temperature limit alarm system is selected, it is necessary to regularly check whether its function is normal.
When the equipment is not in use for a long time, it should be disconnected and cleaned properly.
When moving or handling equipment, be careful to avoid violent vibrations.
