Overview
HZLB LGZD-450Y cold light chamber (cold Illuminant) is an intelligent foster device using microcomputer program control and LCD liquid crystal display. It can accurately simulate the temperature changes of day and night, and provide a sufficient and stable cold Illuminant light environment. It is suitable for experimental research on plant growth, seed germination and other experimental studies that require precise temperature and light control.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30 programs can be set, each lasting 1-99 hours, to meet the requirements of different growth parameters.
3. Using brand Compressor and environmentally friendly refrigerant (R134a), stable operation, high efficiency and energy saving.
4. With anti-fog observation window and lock, mirror stainless steel liner, Shelf bracket can be freely loaded and unloaded for easy cleaning.
5. Using LED cold Illuminant, beam of light does not produce heat, extracting beneficial light for plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant can be designed, to achieve random arrangement of point formation, multi-color light can be freely combined and matched.
7. LED Illuminant has extremely low energy consumption, about 80% lower than ordinary Illuminant. Combined with foam insulation technology, the use cost is low, and the warranty period of the whole machine is extended to two years.
8. Illuminant service life of more than 50,000 hours, high photoelectric conversion efficiency.
9. LED Illuminant Response Fast (nanosecond level), integrated point array design, uniform lighting.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted planar illumination ensures uniform absorption of Illuminants by the foster, and the experimental results are consistent.
12. Horizontal circulating air design to ensure uniform temperature across layers.
13. Illuminant height adjustable shelf according to crop growth.
14. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The incubator precisely adjusts the working state of the Compressor refrigeration, heating system and LED cold Illuminant through the microcomputer Control system to achieve accurate control of the temperature and light in the box. The horizontal circulating air system ensures uniform temperature in the box, while the top LED point array Illuminant provides a stable, uniform and efficient lighting environment, simulating the light and temperature conditions required for plant growth.
Applications
Plant growth research, seed germination experiments, biological fostering, agricultural research
Standards
Domestic patented products
Steps
1. Connect AC 220V 50Hz power supply to ensure that the working Ambient Temperature is between + 5~ 30 ℃.
2. Through the microcomputer control panel and LCD display, set the required temperature program (-15~ 50 ° C) and light intensity (0-15000LX).
3. Up to 30 programs can be set, each running for 1-99 hours.
4. Put the foster in the box and adjust the distance from the Illuminant with the adjustable shelf.
5. Start the device and enter the Continuous Cycle Operating Mode.
6. Check the internal situation through the observation window. During the experiment, you can download data through a U disk or connect to a computer through the optional RS485 interface for monitoring.
Notice
Equipment should be placed in a well-ventilated place with suitable Ambient Temperature (+ 5~ 30 ℃).
• Make sure to use the specified Power supply voltage (AC 220V 50Hz).
• When cleaning the liner, remove the free-loading Shelf bracket first.
• If the temperature limit alarm system is selected, it is necessary to ensure its normal function to ensure safety.
• When used independently as an Illuminant board, the temperature control switch can be turned off.
After a long period of operation, it is recommended to check the operating status of the equipment regularly.
• Optional functions (such as CO2 Control, Different Color Illuminants, Computer Connections, etc.) should be operated according to the corresponding instructions.
