Overview
HZLB LGZD-800Y cold light chamber (cold Illuminant) is an intelligent foster device using microcomputer program control and LCD liquid crystal display. It can simulate day and night temperature changes and provide stable light through the top LED cold Illuminant and precise temperature Control system, which is suitable for experiments and studies that require precise environment control such as plant growth and seed germination.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes, set 30 programs, each for 1-99 hours.
2. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term stable operation and low energy consumption.
3. The door has an anti-fog observation window and a lock, the liner is mirror stainless steel, the four corners and a half arc transition, and the Shelf bracket can be freely loaded and unloaded for easy cleaning.
4. Using overhead LED Cold Illuminant (Color temperature 4000K), the beam of light does not produce heat, the energy consumption is about 80% lower than that of ordinary Illuminant, and the service life is more than 50,000 hours.
5. LED Illuminant board size is 420 * 480mm, 675 lamp beads per board, Response fast, uniform coverage, light box can be easily replaced, and can be used independently as Illuminant board to achieve a box of dual-use.
6. Horizontal circulating air design to ensure uniform temperature of each layer; adjustable shelf, Illuminant height can be adjusted with crop growth.
7. Optional independent temperature limit alarm system, U disk data download, RS485 interface, CO2 air inlet and controller, and LED Illuminants of different layers.
Principle
The device precisely adjusts the working state of the Compressor refrigeration, heating system and LED cold Illuminant through the microcomputer Control system to achieve the set temperature and light program. The horizontal circulating air system ensures that the temperature in the box is evenly distributed, and the top LED Illuminant board provides stable, uniform and heat-free light, simulating the light environment required for plant growth. When the setting program is running, the device controls the periodic change of temperature and light in sequence.
Applications
Plant growth research, seed germination experiments, biological fostering, agricultural research
Standards
Domestic patented products
Steps
1. Connect AC 220V 50Hz power supply to ensure that the working Ambient Temperature is between + 5~ 30 ℃.
2. Through the microcomputer control panel and LCD display, set the required temperature program (-15~ 50 ° C) and light intensity (0-15000LX).
3. Up to 30 programs can be programmed, each running for 1-99 hours.
4. Put the foster into the box, and adjust the position by using the adjustable shelf.
5. Start the device, and the device will run automatically according to the set program, performing continuous cycle work.
6. You can check the internal situation through the observation window and take out the sample after the experiment.
7. Optional function: download data through a U disk, or connect to a computer through an RS485 interface for monitoring and recording.
Notice
* Equipment needs to work at + 5~ 30 ℃ Ambient Temperature.
Make sure the power supply is AC 220V 50Hz.
* Shelf bracket can be loaded and unloaded when liner is cleaned.
* LED Illuminant is a cold Illuminant, please follow the instructions when replacing the light box after long-term use.
If a temperature limit alarm system is selected, please pay attention to its setting value to ensure the safety of the experiment.
* When the equipment is running continuously, please ensure that the surrounding is well ventilated.
* Accessories such as optional CO2 controllers, please refer to their separate instructions for installation and use.
