Overview
HZLB LRG-350-LED Artificial climate box (top LED Illuminant) is a 350L microcomputer program control device that can accurately simulate day and night temperature, Humidity changes, and provide a stable and controllable lighting environment. It uses top LED flat Illuminant, mirror stainless steel liner and brand Compressor, which is suitable for experiments and studies that require precise environment control such as plant growth and seed germination.
Features
1. Microcomputer program control Temperature, Humidity, Illumrination degree, can simulate day and night changes.
2. 30-stage program can be set, each time range is 1-99 hours (optional), to meet the requirements of different growth stage parameters.
3. Adopt brand Compressor and R134a environmentally friendly refrigerant to ensure long-term continuous and stable operation and low energy consumption.
4. With anti-fog observation window and door lock, mirror stainless steel liner four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean.
5. Using overhead LED Cold Illuminant (Color temperature 4000K), the beam of light does not generate heat, the energy consumption is extremely low, and the service life is up to 50,000 hours or more.
6. LED Illuminant board size is 420 * 480mm, 675 lamp beads per board, which can realize the free combination of point array arrangement and multi-color light (optional).
7. The whole machine adopts foaming insulation technology to further reduce energy consumption and use costs, with a low accident rate and an extended warranty period of up to two years.
8. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
9. Horizontal circulating air design to ensure uniform temperature across layers.
10. Illuminant height adjustable shelf according to crop growth.
11. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
12. With data recording function, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
13. Optional CO2 inlet and imported infrared CO2 controller to promote plant growth.
14. Each layer can be independently equipped with LED Illuminants of different Colors (optional).
Principle
The Artificial climate box integrates the Compressor, humidification system and LED Illuminant with a microcomputer controller to precisely adjust the temperature, Humidity and light intensity in the box. The horizontal circulating air system ensures uniform air flow in the box, so that the environment parameters of each layer are consistent. The LED Cold Illuminant provides uniform light from the top, and its Light spectrum can be designed according to the needs of plant growth. The equipment can be programmed to simulate complex day and night environment cycle changes, providing stable experimental conditions for biological foster.
Applications
Plant growth research, seed germination experiment, biological fostering, agricultural research, environment simulation test
Steps
1. Place the equipment in a stable, ventilated, non-corrosion gas environment. Ambient Temperature is recommended to be between 0 and 30 ° C and Humidity is less than 85%.
Connect the AC 220V 50Hz power supply.
3. Through the microcomputer control panel, set the required temperature, Humidity, light intensity and time program (up to 30 segments can be set).
4. Place the fosters on the adjustable shelf and adjust the shelf height as needed.
5. Close the box door and lock it, and start the equipment to run.
6. The internal situation can be viewed through the observation window. If you need to change the parameters during operation, you can adjust them through the control panel.
7. After the experiment, remove the sample and turn off the power.
8. Regularly clean the inner tank of the box, load and unload the Shelf bracket for thorough cleaning.
Notice
* Equipment should be placed away from heat sources, away from direct sunlight and well ventilated.
* Ensure that the working Ambient Temperature is in the range of RT + 0~ 30 ℃, Humidity < 85% and no corrosion gas.
* Do not switch the Compressor on and off frequently to ensure its service life.
* When cleaning the liner, please use a soft cloth to wipe and avoid the use of corrosion cleaners.
* When the equipment is running, do not open the door for a long time, so as not to affect the internal environment Stability.
If you choose a temperature limit alarm system, please regularly test whether its function is normal.
* When using a USB stick to download data or connect through a computer (optional function), please ensure that the operation is correct to avoid data loss.
* Accessories such as optional CO2 controllers should be operated and maintained in strict accordance with their instructions.
