Overview
The HZLB LGZ-350-LED light chamber is a microcomputer program-controlled experimental device used to simulate the light and temperature environment required for plant growth. It uses an overhead flat LED Illuminant and a horizontal circulating air system to ensure that the foster is evenly lit and the temperature of each layer is consistent, providing accurate and stable conditions for plant fostering, seed germination and other experiments.
Features
1. Microcomputer program control, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the requirements of different growth stages.
3. Adopt brand Compressor and environmentally friendly refrigerant (R134a) to ensure long-term continuous, efficient and low energy consumption operation.
4. With anti-fog observation window and door lock, mirror stainless steel liner is easy to clean, and the shelf can be freely loaded and unloaded.
5. Using cold Illuminant LED, the beam of light does not produce heat, extracting the Light spectrum favorable for plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant can be designed, to achieve random arrangement of point array, multi-color light ratio can be freely combined.
7. LED energy consumption is extremely low (about 80% lower than ordinary Illuminant), combined with foam insulation technology, energy saving and extended warranty period to two years.
8. LED Illuminant has a lifespan of more than 50,000 hours and high photoelectric conversion efficiency.
9. LED Response Fast (nanosecond level), Integrated point array Illuminant to ensure uniform coverage.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted planar illumination ensures that the foster absorbs Illuminants sufficiently and keeps the experimental results in conformity.
12. Horizontal circulating air ensures uniform temperature across layers.
13. Illuminant height adjustable with crop growth.
14. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with different Color LED Illuminants (optional).
Principle
The light chamber precisely controls the temperature and illumination in the chamber through a microcomputer program. Its LED cold Illuminant system provides stable, uniform and efficient lighting without generating additional heat. The horizontal circulating air system ensures that the air in the chamber flows evenly, so that the temperature of each layer is consistent. Users can set up multiple programs to simulate different day and night temperatures and light cycles according to experimental needs, creating an ideal growth environment for fosters.
Applications
Plant fostering, seed germination, microbial fostering, tissue fostering, biological product research, agricultural research, environment simulation experiment
Steps
1. Place the equipment in a stable, ventilated, non-corrosion gas environment and connect the power supply.
2. Open the box door and install or adjust the height of the adjustable shelf as needed.
3. Place the foster on the shelf, close the box door and lock it.
4. Through the microcomputer control panel, set the required temperature, Illumrination degree and program segment (up to 30 segments, each segment 1-99 hours).
5. Start the device and observe the LCD display to confirm that the parameters are running normally.
6. The internal situation can be viewed through the observation window. If the Illuminant is used independently during the experiment, the temperature control switch can be turned off.
7. After the experiment, take out the foster, and if necessary, remove the shelf for cleaning in the box.
8. If the data recording function is optional, the experimental data can be downloaded through the U disk.
Notice
• Equipment Ambient Temperature should be between 0~ 30 ℃, Humidity should be less than 85%, and no corrosion gas.
• Power supply voltage 220V 50Hz and reliable grounding.
• When the equipment is running, the Compressor is in Intermittent Operating Mode, which is a normal phenomenon.
• Do not open and close the box door frequently, so as not to affect the stability of the temperature and Humidity in the box.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the temperature limit alarm system is selected, please regularly test whether its function is normal.
Before moving or servicing equipment, be sure to disconnect the power supply.
• Optional functions (such as CO2 control, RS485 interface, etc.) Please follow the corresponding instructions.
