Overview
The HZLB LGZ-450-LED light chamber is a microcomputer program-controlled device used to simulate the light and temperature environment required for plant growth. It uses an overhead LED planar lighting and horizontal circulating air system to ensure that the foster absorbs the Illuminant evenly and the temperature of each layer is consistent. It is suitable for experiments and studies that require precise control of growth conditions.
Features
1. Microcomputer program control temperature and Illumrination degree, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the requirements of plant growth parameters at different stages.
3. Use brand Compressor and R134a refrigerant to ensure long-term continuous and low energy consumption operation.
4. With anti-fog observation window and lock, mirror stainless steel liner is easy to clean, and the shelf can be freely loaded and unloaded.
5. Using cold Illuminant LED, the beam of light does not produce heat, extracting the Light spectrum favorable for plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant can be designed, to achieve random arrangement of point array, multi-color light ratio can be freely combined.
7. LED energy consumption is extremely low, about 80% lower than ordinary Illuminant, combined with foam insulation technology, energy saving and extended warranty period to two years.
8. LED Illuminant has a lifespan of more than 50,000 hours and high photoelectric conversion efficiency.
9. LED Response Time is nanosecond, integrated point array Illuminant to ensure uniform coverage.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted planar illumination ensures that the foster absorbs Illuminants sufficiently and maintains the conformity of the experimental results.
12. Horizontal circulating air ensures uniform temperature across layers.
13. Illuminant height adjustable shelf according to crop growth.
14. Equipped with an independent temperature limit alarm system (optional) to ensure the safety of the experiment.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The light chamber precisely sets and adjusts the temperature and illuminance in the box through a microcomputer programmed Control system. The refrigeration system (Compressor and R134a refrigerant) and heating system work together to control the temperature within the set range. The overhead LED Illuminant board provides stable, uniform and efficient light, and its Light spectrum is optimized to facilitate plant growth. The horizontal circulating air system ensures that the air in the box flows evenly, so that the temperature of each layer is consistent, thus creating a stable, controlled growth environment for the foster.
Applications
Plant fostering research, seed germination experiment, tissue fostering, microbial fostering, mass testing
Steps
1. Place the equipment in a stable, ventilated, non-corrosion gas environment, Ambient Temperature 0-30 ℃, Humidity < 85%.
Connect the 220V/50Hz power supply.
3. Set the required temperature, Illumrination degree and program parameters through the microcomputer control panel.
4. Place the foster on the adjustable shelf and adjust the shelf height as needed.
5. Start the device and run the setting program.
6. The internal situation can be viewed through the observation window, and the data can be downloaded during operation or connected to the computer monitoring through the optional interface.
7. After use, turn off the equipment according to the prescribed procedures and clean the box.
Notice
• Please ensure that the equipment works at the specified Ambient Temperature (0-30 ° C) and Humidity (< 85%), and there is no corrosion gas around.
Equipment should be placed smoothly to ensure good ventilation.
• Power supply voltage is 220V/50Hz before use.
• Do not turn on and off the machine frequently, so as not to affect the life of the equipment.
• When cleaning the liner, wipe it with a soft cloth and avoid using corrosion cleaners.
• If the temperature limit alarm system is selected, please check its function regularly.
• When the equipment is not used for a long time, please disconnect the power supply and keep the box drying.
• When performing maintenance or troubleshooting, please refer to the data recorded by the equipment or contact a professional.
• Optional functions (such as CO2 Control, Specific Color Illuminants, Computer Connections, etc.) should be operated according to the corresponding instructions.
