Overview
The HZLB LGZ-1000-LED light chamber (LED Illuminant) is a microcomputer program-controlled device used to simulate the light and temperature environment required for plant growth. It has precise temperature and light control capabilities, and adopts an overhead LED plane light and horizontal circulating air system to ensure a uniform and stable foster environment. It is suitable for experimental research on various plant fostering and seed germination.
Features
1. Microcomputer program control temperature, Illumrination degree, LCD liquid crystal display, can simulate day and night temperature changes.
2. 30-stage programs can be set, each lasting 1-99 hours, to meet the requirements of plant growth parameters at different stages.
3. Using brand Compressor and R134a refrigerant to ensure long-term continuous, efficient and low energy consumption operation.
4. With anti-fog observation window and door lock, mirror stainless steel liner is easy to clean, and the shelf can be freely loaded and unloaded.
5. Using overhead LED cold Illuminant, the beam of light does not produce heat, extracting the Light spectrum beneficial to plant growth, Illuminant board size 420 * 480mm, Color temperature 4000K.
6. LED Illuminant has the characteristics of miniaturization, planarization and strong designability, which can realize the free arrangement of point formation and multi-color light.
7. LED Illuminant energy consumption is extremely low, about 80% lower than ordinary Illuminant, combined with foam insulation technology, energy saving and extended warranty period to two years.
8. LED Illuminant has a service life of more than 50,000 hours and high photoelectric conversion efficiency.
9. LED Illuminant Response Time is nanosecond, integrated point array design to ensure uniform light coverage.
10. The light box can be easily replaced and can be used independently as an Illuminant board to achieve a dual-use box.
11. Top-mounted planar lighting ensures uniform absorption of Illuminants by the foster and maintains the conformity of experimental results.
12. Horizontal circulating air ensures uniform temperature across layers.
13. Illuminant height adjustable shelf according to crop growth.
14. Equipped with an independent temperature limit alarm system (optional), which automatically interrupts when the temperature exceeds the limit to ensure safety.
15. Parameter changes can be recorded, data can be downloaded through a U disk, and an optional RS485 interface can be connected to computer monitoring (optional).
16. Can be equipped with CO2 air inlet and imported infrared CO2 controller (optional).
17. Each layer can be equipped with LED Illuminants of different Colors (optional).
Principle
The light chamber precisely adjusts the temperature and light intensity in the chamber through a microcomputer Control system. The refrigeration system (Compressor and R134a refrigerant) and heating system work together to achieve a set Temperature range. The overhead LED Illuminant array provides stable, uniform and suitable light spectrum, simulating the natural light environment. The horizontal circulating air system ensures the flow of air in the chamber, resulting in uniform temperature and gas distribution, creating a controlled and optimized environment for plant growth.
Applications
Plant fostering, seed germination experiment, biological research, agricultural research, tissue fostering, environment simulation experiment
Standards
The data did not mention specific compliance criteria
Steps
1. Place the equipment in a stable, ventilated, non-corrosion gas environment and connect the power supply (220V 50Hz).
2. Open the box door and install or adjust the height of the adjustable shelf as needed.
3. Place the foster on the shelf, close the box door and lock it.
4. Through the microcomputer control panel, set the required temperature program (0-50 ° C) and lighting program (0-30000LX).
5. For complex experiments, up to 30 programs can be set, each setting time (1-99 hours) and corresponding parameters.
6. Start the device and observe the LCD display to confirm the operating parameters.
7. During the experiment, the internal situation can be viewed through the observation window.
8. After the experiment, take out the foster.
9. When necessary, removable shelves can be used for cleaning in the box.
10. If the data recording function is optional, the experimental data can be downloaded through the U disk or connected to the computer through the RS485 interface.
Notice
• Equipment should work under the conditions of Ambient Temperature 0~ 30 ℃, Humidity < 85% and no corrosion gas.
• Power supply voltage 220V 50Hz and reliable grounding.
The noise during equipment operation is less than or equal to 70dB, which is a normal phenomenon.
• The Compressor is Intermittent Operating Mode, which is a normal design.
• Do not open and close the box door frequently, so as not to affect the stability of internal temperature and Humidity.
• When cleaning the liner, please use a soft cloth to wipe the mirror stainless steel to avoid the use of corrosion cleaners.
• If the temperature limit alarm system is optional, please do not change or turn off this function at will.
Before moving or maintaining equipment, be sure to disconnect the power supply.
• Accessories such as optional CO2 controllers, please follow their special instructions for operation and maintenance.
