Overview
The HZLB MJX-300B mildew incubator is a 300L constant temperature and humidity fostering device with a Temperature range of 0-65 ° C, Temperature Fluctuation +/- 0.5 ° C, and optional Humidity control function (40-95% RH). The device is controlled by a large-screen LCD program, which is convenient and accurate to operate, and is suitable for the fostering of microorganisms such as molds.
Features
1. Large-screen LCD program control, one-screen display of multiple sets of data, blue backlight, simple operation and accurate control.
2. Intuitively display the operation process, set temperature, temperature in the box, remaining time of the operation period, Ambient Temperature and protection temperature.
3. 1-99 time slots can be set, with a time range of 1-999 hours for each time period, to achieve automatic conversion.
4. The liner protection temperature can be set, and the software and hardware will automatically cut off the heating power when it exceeds the temperature to protect the sample.
5. With Ultra Temperature Sensor Abnormal Protection Function to Ensure Instrument and Sample Safety.
6. Contains ultraviolet mold lamp sterilization system, which is conducive to plant growth and improves disease resistance.
7. The liner is made of stainless steel.
8. With power-down memory and power-down time automatic compensation function, the original working state can be continued after power failure.
9. With Sensor (Ambient Temperature, Protection Temperature, Cabinet Temperature) fault identification function, easy to troubleshoot.
10. Optional ultra-high temperature and ultra-low temperature remote warning and APP alarm function.
11. Optional data network extraction function, transmit data to the network through GPRS, support computer to view, download, print and analyze data Linear dispersion.
12. Optional mobile app to view data Linear dispersion and set the upper and lower limits of the alarm.
Principle
The mildew incubator precisely adjusts the temperature and Humidity in the tank (optional) through a programmed Control system to provide a stable environment for microbial foster. Its Compressor works intermittently for continuous operation and is equipped with a UV sterilization system. The system has multiple protection mechanisms, such as liner temperature protection, Sensor fault identification, etc., to ensure safe and reliable operation.
Applications
Mold fostering, microbial fostering, plant growth research
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required temperature, Humidity (if optional) and running time program through the large-screen LCD control panel.
3. Start the equipment, the system starts to work, and the Compressor runs intermittently to maintain the set environment.
4. During operation, real-time data and Linear dispersion can be monitored through the screen or optional APP/network functions.
5. After the operation is completed, the device can automatically stop or enter the next period according to the set program.
Notice
* Equipment should be placed in a smooth, well-ventilated environment.
* Power supply voltage meets requirements (220V +/- 22V) before use.
* Set liner protection temperature to prevent sample overheating.
* If the Humidity function is selected, please pay attention to replenishing the humidifier water tank (capacity 5L) in time.
* During the operation of the equipment, do not frequently open and close the box door, so as not to affect the internal Humidity Stability.
* When performing sterilization operations, please pay attention to the safety of the UV Lamp.
* If there is an alarm prompt such as Sensor failure, please check or contact a professional in time.
* Optional remote warning and data functions require network configuration according to instructions.
* Regularly clean the equipment liner to maintain hygiene.
