Overview
The HZLB 101-1SB electric thermostatic blast drying oven is a 70L laboratory equipment with a stainless steel liner and a microcomputer intelligent temperature control system. It achieves a wide range of accurate temperature control from RT + 5 to 300 ° C through wind circulation heating, with a temperature control accuracy of +/- 0.5 ° C and a Temperature Fluctuation of +/- 1 ° C. It is suitable for scenarios requiring static thermodrying, heating or simulating the natural environment.
Features
1. Using microcomputer intelligent temperature control display, with PID self-tuning, automatic temperature warning, leakage protection and time setting functions, high temperature control accuracy.
2. Adopt wind circulation heating and cooling, control the air in the box through a microcomputer, simulate the natural environment, and make the heating more uniform.
3. Adopt stainless steel studio, double door structure, the inner door is tempered Glass, which is convenient for observation, and can maintain thermostatic for a long time after power failure.
4. The shelf can be adjusted freely, and the gap can be adjusted reasonably according to the specifications of the goods, making full use of the space.
Principle
The drying oven heats or cools the air in the box through a microcomputer Control system to form a forced air circulation. This circulation method makes the temperature field in the working room more uniform and simulates the natural environment, thus ensuring that the internal items (such as seeds) are heated evenly to achieve the desired treatment effect.
Applications
Seed germination experiment, laboratory drying, material heating, thermostatic fostering
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required temperature (RT + 5~ 300 ° C) and timing time (1~ 9999 minutes) through the microcomputer control panel.
3. Start the equipment, and the system will automatically perform PID self-tuning and start heating/cooling to achieve air circulation.
4. The internal situation can be observed through the tempered Glass inner door.
5. After reaching the set time or completing the work, turn off the device and disconnect the power supply.
Notice
* The equipment should work under the condition of no corrosion gas and Ambient Temperature of RT + 0~ 35 ℃.
* Power supply voltage meets requirements (220V +/- 22V) before use.
* Do not open the door for a long time when the equipment is running, so as not to affect the uniformity of the temperature field and the thermostatic effect.
When placing items, adjustable shelves can be used to allocate space reasonably to avoid blocking the air duct.
The equipment has a leakage protection function, but it is still necessary to pay attention to electrical safety.
Please disconnect the power supply when cleaning.
