Overview
HZLB 101-2S electric thermostatic blast drying oven is a microcomputer intelligent temperature control drying equipment, with air circulation heating and cooling function, suitable for drying, heating, thermostatic and other scenes with high requirements for Temperature uniformity and accuracy. Its stainless steel studio and double door structure design ensure good thermal insulation performance and observation convenience.
Features
1. Using microcomputer intelligent temperature control display, with PID self-tuning, automatic temperature warning, leakage protection and time setting functions, high temperature control accuracy.
2. Adopting wind circulation heating and cooling technology, the air in the box is controlled by a microcomputer to simulate the natural environment and make the heating more uniform.
3. Equipped with stainless steel studio and double door structure, the inner door is tempered Glass, which is convenient for observation, and can maintain thermostatic for a long time after power failure.
4. The shelf can be adjusted freely, and the gap can be adjusted reasonably according to the specifications of the goods, making full use of the space in the box.
Principle
The drying oven is heated or cooled by the microcomputer Control system, and uses the air circulation system to force the hot air or cold air to circulate inside the studio, thereby simulating the natural environment, ensuring the uniform and stable temperature in the box, and achieving accurate thermostatic control.
Applications
Seed germination experiment, material drying, workpiece heating, thermostatic fostering, routine heat treatment in laboratory
Standards
The data did not mention specific compliance criteria
Steps
1. Turn on the power supply (220V +/- 22V, 50Hz +/- 0.5Hz).
2. Set the required temperature (RT + 5~ 300 ° C) and time (1~ 9999 minutes) through the microcomputer control panel.
3. Start the equipment, and the system will automatically perform PID self-tuning and start heating/cooling.
4. The contents of the box can be observed through the tempered Glass inner door.
5. After the work is completed, the device will automatically stop or sound an alarm, disconnecting the power supply.
Notice
* Equipment should be placed in a workplace with no corrosion gas and Ambient Temperature between 0 and 35 ° C.
* Power supply voltage meets requirements (220V +/- 22V) before use.
* Do not open and close the door frequently when the equipment is running, so as not to affect the Temperature Stability.
* When adjusting the shelf, it should be carried out after the power is cut off or the equipment is chilled down, and pay attention to safety.
The equipment has a leakage protection function, but it is still necessary to ensure a good grounding.
* Please disconnect the power supply when cleaning, wipe with a soft cloth, and avoid the use of corrosion cleaners.