Overview
JINGHONG DNP-9082 electric thermostatic incubator is a laboratory equipment for Universities & colleges, biology, agriculture, scientific research and other departments to store bacteria and foster biology. It adopts microcomputer intelligent temperature control, has a double door structure inside and outside, and the liner is made of mirror stainless steel with a volume of 80L.
Features
1. Microcomputer intelligent temperature controller, with dual digital display for setting and measuring temperature and PID self-tuning functions, accurate and reliable temperature control, with timing function (up to 9999 minutes).
2. Double door structure inside and outside, the inner door is fully tempered Glass, does not affect the temperature inside the box when observing, and the temperature fluctuation is small.
3, mirror stainless steel liner, four corners half arc design, easy to clean.
4, with over-temperature alarm system to ensure the safe operation of equipment.
5. Using Water-jacketed Heating mode (GNP model), the temperature is uniform and the thermostatic can be maintained for a long time after power failure.
6. Optional embedded printer or RS-485 interface can be used to connect a printer or computer to record temperature parameters.
7. Optional programmable LCD Touchscreen controller, multi-stage program control can be set, and the operation is simple.
8, optional SMS monitoring alarm system, equipment failure can be notified by SMS specified members.
Principle
The incubator performs precise temperature control through a microcomputer intelligent temperature controller. Water-jacketed Heating mode (GNP model) is used to make the temperature in the box uniform and stable. When the temperature deviates from the set value, the Control system adjusts through the PID self-tuning function to maintain a thermostatic environment. The double door structure inside and outside helps to reduce temperature fluctuations when opening the door.
Applications
Universities & colleges, biology, agriculture, scientific research departments of bacteria storage, biological foster
Steps
1. Turn on the power supply (AC 220V 50Hz).
2. Set the required temperature (RT + 5~ 65 ° C) and timing time (1~ 9999 minutes, if necessary) through a microcomputer intelligent temperature controller.
3. Put the items to be fostered on the shelf.
4. Close the inner and outer doors and start the device to work.
5. The inside of the box can be observed through the fully tempered Glass inner door.
6. After the work is completed, remove the items and turn off the power.
Notice
• Equipment Ambient Temperature should be between 5~ 30 ℃.
• Power supply voltage is AC 220V 50Hz.
• When observing the situation inside the box, please try to shorten the time to open the outer door to reduce temperature fluctuations.
• Pay attention to the status of the over-temperature alarm system to ensure the safe operation of the equipment.
• When cleaning, please use the semi-circular arc angle design of the mirror stainless steel liner for cleaning.
• Optional functions (such as printer, Touchscreen controller, SMS alarm) need to be installed and used according to the corresponding instructions.
