Overview
JINGHONG GNP-9050 Water-Jacketed thermostatic incubator is a laboratory equipment using Water-Jacketed Heating mode, mainly used in Universities & colleges, biology, agriculture, scientific research and other departments for bacterial storage and biological fostering. It is an essential equipment for scientific research laboratories.
Features
1. Adopt a microcomputer intelligent temperature controller, with dual digital display for setting and measuring temperature and PID self-tuning function, accurate and reliable temperature control, optional timing function (up to 9999 minutes).
2. The inner and outer double door structure is adopted, and the inner door is fully tempered Glass. When observing the situation in the box, it does not affect the temperature in the box, and the temperature fluctuation is small.
3, the liner is made of mirror stainless steel, four corners and a half arc design, easy to clean.
4. Equipped with over-temperature alarm system to ensure the safe operation of equipment.
5. Using Water-Jacketed Heating mode, the temperature is uniform, and the thermostatic state can still be maintained for a long time after power failure.
6. Optional embedded printer or RS-485 interface is available for easy connection to a printer or computer to record temperature parameter changes.
7. Optional programmable LCD Touchscreen controller, supports multi-stage program control, and displays a variety of parameters on one screen, making it easy to operate.
8. Optional SMS monitoring and alarm system can notify the specified members in time when the equipment fails.
Principle
The incubator uses Water-Jacketed (Water-jacketed) Heating mode. By heating the water in the jacket, the water's large heat capacity, uniform temperature and slow change characteristics are used to evenly transfer heat to the interior of the studio, thus achieving an accurate and stable thermostatic environment. The microcomputer intelligent temperature controller continuously monitors and adjusts the Heating power through the PID self-tuning algorithm to ensure that the temperature in the box is accurately maintained at the set value.
Applications
Universities & colleges, biology, agriculture, scientific research departments of bacteria storage, biological foster
Steps
1. Place the equipment in a stable and well-ventilated working environment.
Connect the AC 220V 50Hz power supply.
3. Turn on the power switch and set the required temperature and Working time (if necessary) through the microcomputer thermostat.
4. After the temperature in the box reaches the set value, put the sample to be fostered.
5. Close the inner and outer doors and start the fostering process.
6. After the foster is over, take out the sample and turn off the power of the equipment.
Notice
• Equipment Ambient Temperature is recommended between 5 and 30 ° C.
• Do not frequently open and close the box door when the equipment is running, so as not to affect the temperature Stability.
• Pay attention to keep the box clean and clean it regularly.
• If relevant functions (such as printer, Touchscreen controller, SMS alarm) are selected, please follow the corresponding instructions.
• The equipment has over-temperature alarm function, please check and troubleshoot in time when alarming.
Before moving or cleaning equipment, be sure to disconnect the power supply.
