Overview
JINGHONG MJP-150Y mildew incubator is a thermostatic equipment specially used for mold, bacteria, microbial fostering, preservation, plant cultivation and breeding experiments. It is suitable for scientific research, universities and production departments in the fields of environment protection, drug inspection, agriculture, livestock, aquatic products, etc. It can also be used for water analysis and BOD determination.
Features
1. Adopt a new generation of Touchscreen intelligent temperature controller, large screen touch screen, easy to operate.
2. With two modes of fixed value and program, program editing is easy.
3. Equipped with a user-friendly help menu key to guide first-time users.
4. The screen can display the real-time operating temperature Linear dispersion chart.
5. The program capacity reaches 30 cycles of 99 cycles, and the MAX Maximum is set to 9999 minutes for each period.
6. With P.I.D automatic calculation function, temperature and Humidity control is accurate and stable.
7. Optional embedded printer or RS-485 Communication interface for data upload.
8. Optional 220V socket can be installed in the working room for BOD determination.
9. The double door structure is adopted, and the inner door is a fully tempered Glass door.
10. The box is equipped with a UV Lamp for easy disinfection.
Principle
The incubator provides precise temperature control through the Touchscreen intelligent thermostat. The thermostat uses the P.I.D automatic calculation function to monitor and correct the temperature and Humidity changes in the box in real time, ensuring that the foster environment is stable at the set value. The heating and cooling systems (inferred from the Temperature range of 5~ 50 ° C) in the box work together to achieve the required thermostatic conditions.
Applications
Environment protection, drug inspection, agriculture and livestock, aquatic products, scientific research, colleges and universities, production departments, water analysis, BOD determination, bacterial foster, mold foster, microbial foster, microbial preservation, plant cultivation, breeding test
Standards
The data did not mention specific compliance criteria.
Steps
The information does not provide detailed operation steps. It is recommended to refer to the instruction manual attached to the equipment. General operations may include: 1. Turn on the power supply. 2. Set the required temperature, time and other parameters through the Touchscreen. 3. Start the equipment to run. 4. Take out the sample after the operation is over.
Notice
The information does not provide specific precautions. Please read the product manual carefully before use.
* Note that the power requirements of the device are AC 220V 50Hz.
* Optional functions (such as printer, Communication interface, 220V socket) need to be configured according to actual needs.
* When disinfecting the UV Lamp in the box, pay attention to safety and avoid direct gaze.
* When the equipment is running, do not open and close the box door frequently to avoid affecting the stability of internal temperature and Humidity.
