Overview
JINGHONG MJP-250Y mildew incubator is a special thermostatic equipment suitable for environment protection, drug inspection, agricultural livestock, aquatic and other scientific research, universities and production departments. It is mainly used for water body analysis and BOD determination, as well as the fostering, preservation of bacteria, molds and microorganisms, plant cultivation and breeding experiments.
Features
1. Adopt a new generation of Touchscreen intelligent temperature controller, large screen touch screen, easy to operate.
2. Provide two modes of fixed value and program, which can be programmed.
3. Equipped with a user-friendly help menu key to guide first-time users.
4. The screen can display the real-time operating temperature Linear dispersion chart.
5. The program capacity is 30 cycles of 99 steps, and the MAX Maximum is set to 9999 minutes per cycle.
6. With P.I.D automatic calculation function, accurate and stable control of temperature and Humidity.
7. Optional embedded printer or RS-485 Communication interface for data upload computer.
8. Optional 220V socket can be installed in the working room for BOD determination.
9. The double door structure is adopted, and the inner door is a fully tempered Glass door.
10.The liner is made of mirror stainless steel.
Principle
The mildew incubator performs precise temperature control through the Touchscreen intelligent temperature controller. The temperature controller adopts the P.I.D automatic calculation function, which can correct the temperature and Humidity change conditions in real time to ensure the accuracy and stability of the internal environment (temperature) of the incubator. Users can set the required temperature parameters or edit complex multi-stage programs through the Touchscreen, and the system can control the heating elements and other operations to maintain constant foster conditions in the studio.
Applications
Environment protection, drug inspection, agriculture and livestock, aquatic products, scientific research, colleges and universities, production departments, water analysis, BOD determination, bacterial foster, mold foster, microbial foster, microbial preservation, plant cultivation, breeding test
Steps
Connect the device to an AC 220V 50Hz power supply.
2. Power on through Touchscreen and familiarize yourself with the operation according to the help menu key.
3. Select the setting mode or program mode, set the required temperature parameters or edit the multi-stage program.
4. After confirming the parameters, start the equipment and start the foster work.
5. Linear dispersion can be observed through the screen.
6. After the foster is over, turn off the equipment according to the procedures.
Notice
• Make sure to use AC 220V 50Hz power supply.
• When the equipment is running, do not open and close the box door frequently, so as not to affect the stability of internal temperature and Humidity.
Before cleaning or maintenance, be sure to disconnect the power supply.
• UV Lamp is used for disinfection in the box, please pay attention to safety protection when using it.
• Optional functions (such as printer, Communication interface, 220V socket) need to be configured according to actual needs.
Do not exceed the rated Power Consumption (900W) of the device.
When placing the device, make sure there is enough space around to dissipate heat (refer to Dimensions).
