Overview
JINGHONG GZP-250 light Chamber is a device used to simulate natural environment conditions. It is widely used in microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation and insect and small animal feeding. It can accurately simulate temperature changes during the day and night, providing a stable environment for experiments.
Features
1. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, which is convenient for cleaning in the box.
2, the use of double door structure, good insulation performance. The inner door with all tempered Glass door, open the outer door, observation of the situation inside the box does not affect the temperature inside the box.
3, Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature and Illumrination degree changes.
4, with over-temperature alarm system, beyond the set temperature that emits sound and light alarm and cut off the heating system to ensure the safe operation of equipment.
5. New fluorine-free design, professional LED Illuminant lighting, effective, energy saving, promote emission reduction.
6. Programmable lighting Chamber (S type) with 30 programmable temperature control instrument, up to 30 temperature changes can be set.
7. Artificial climate box integrates temperature, Humidity and Illumrination degree control. 30-segment programmable controller can simulate natural climate as much as possible.
8. Can be equipped with embedded printer or RS-485 Communication interface, real-time monitoring of experimental process or record experimental data. (optional)
Principle
The device precisely adjusts the temperature and light intensity in the box through a microcomputer program Control system. Its double door structure is effectively insulated, and the inner door is fully tempered Glass for easy observation. The system can be programmed to simulate the change of temperature and light between day and night, and is equipped with an over-temperature alarm protection mechanism to ensure a stable and safe experimental environment.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding
Standards
fluorine-free design
Steps
1. Place the device in a stable and well-ventilated position and connect the power supply.
2. Set the required temperature, lighting program, and time parameters through the microcomputer control panel.
3. Place the samples to be fostered (such as culture dishes, seeds, plants, etc.) on a shelf that can be freely loaded and unloaded.
4. Close the double door and start the device running.
5. The inside of the box can be observed through the fully tempered Glass inner door, or the experimental data can be monitored and recorded through the optional Interface.
6. After the experiment, cut off the power supply and remove the Shelf bracket for cleaning in the box.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Do not exceed the Temperature range of 5~ 40 ℃ when setting the temperature.
• If the over-temperature alarm is triggered during operation, please check the settings and troubleshoot before using it.
• When cleaning the liner, please cut off the power first and pay attention to protect the mirror stainless steel surface.
• Optional embedded printer or Communication interface, please follow the corresponding instructions.
• Please use AC 220V 50Hz power supply and make sure the Power matches.
