Overview
JINGHONG GZP-250S program-controlled light Chamber is a device used to simulate diurnal temperature and light changes. It is widely used in microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding and other fields.
Features
1. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean in the box.
2. Double door structure, good insulation performance. The inner door is a fully tempered Glass door, which does not affect the temperature when observing the situation in the box.
3, Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature and Illumrination degree changes.
4, with over-temperature alarm system, beyond the set temperature that emits sound and light alarm and cut off the heating system to ensure safety.
5. Fluorine-free design, equipped with professional LED Illuminant lighting, effective, energy saving, promote emission reduction.
6. With a 30-stage programmable temperature controller, up to 30 temperature changes can be set.
7, Set temperature, Humidity, Illumrination degree control in one, can simulate the natural climate as much as possible.
8. Can be equipped with embedded printer or RS-485 Communication interface, real-time monitoring of experimental process or record experimental data. (optional)
Principle
The device uses a microcomputer program controller to precisely program the temperature, Humidity and Illumrination degree in the box. Using the heating system, cooling system (fluorine-free design) and professional LED Illuminant, simulate the set day and night temperature and light changes Linear dispersion to create the desired foster or growing environment.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding
Steps
1. Place the equipment in a stable and well-ventilated environment and connect the power supply.
2. Through the microcomputer program control panel, set the required temperature, Humidity and Illumrination degree programs (up to 30 segments).
3. Install or adjust the shelves in the box as needed.
4. Place samples to be fostered or tested.
5. Close the double door (first close the inner tempered Glass door, then close the outer door).
6. Start the program and the device starts running.
7. During operation, the inside of the box can be observed through the tempered Glass inner door.
8. After the experiment, remove the sample and disconnect the power supply.
9. If you need to record data, you can operate it through the optional printer or Communication interface.
Notice
Equipment should be placed in a stable, well-ventilated position, away from direct sunlight and heat sources.
• Power supply voltage specified (AC 220V 50Hz) and ensure good grounding.
• When placing the sample, do not block the air duct in the box to ensure smooth air circulation.
• When cleaning the liner, please disconnect the power first and wipe it with a soft cloth to avoid the use of corrosion cleaners.
• Do not open and close the box door frequently during operation, so as not to affect the internal environment Stability.
• Pay attention to the over-temperature alarm function, such as alarm triggering, please check and troubleshoot in time.
• Optional printer or Communication interface, please install and use according to the corresponding instructions.
• When not in use for a long time, clean the device and disconnect the power supply.
