Overview
JINGHONG GZP-750S program-controlled light Chamber is a device that integrates temperature and Illumrination degree control, which can accurately simulate the temperature and Illumrination degree changes during the day and night. It is widely used in microbial tissue cell fostering, seed germination, seedling test, plant cultivation and insect and small animal feeding and other fields.
Features
1. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean in the box.
2. Double door structure, good insulation performance. The inner door is a fully tempered Glass door, which does not affect the temperature in the box when observing the situation in the box.
3, Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature and Illumrination degree changes.
4, with over-temperature alarm system, beyond the set temperature that emits sound and light alarm and cut off the heating system to ensure safe operation.
5. Fluorine-free design and professional LED Illuminant lighting are used to effectively save energy and promote emission reduction.
6. With a 30-stage programmable temperature controller, up to 30 temperature changes can be set.
7, Set temperature, Humidity, Illumrination degree control in one, can simulate the natural climate as much as possible.
8. Can be equipped with embedded printer or RS-485 Communication interface for real-time monitoring of experimental process or recording experimental data (optional).
Principle
The device is controlled by a microcomputer program and uses a 30-segment programmable thermostat to precisely set and adjust the temperature and Illumrination degree in the box to simulate day and night changes in the natural environment. Its heating system and LED Illuminant work together to achieve the set climate conditions, while the over-temperature alarm system ensures safe operation.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding
Steps
1. Turn on the power supply (AC 220V 50Hz).
2. Through the microcomputer control panel, use the 30-segment programmable temperature controller to set the required temperature and Illumrination degree program.
3. Load and unload shelves and place experimental samples as needed.
4. Close the double door (the inner door is a fully tempered Glass door).
5. Start the device to run, and the device will simulate day and night changes according to the set program.
6. It can be observed through the Glass inner door during operation, or the data can be monitored and recorded through the optional printer/Communication interface.
7. After the experiment, turn off the device and disconnect the power supply.
8. Removable Shelf bracket for cleaning in the box.
Notice
* Power consumption of the device is 3700W, please ensure that the Power supply voltage is AC 220V 50Hz and meets the load requirements.
* Do not frequently open and close the outer door during operation, so as not to affect the temperature Stability in the box.
* When the over-temperature alarm system is triggered, please check and troubleshoot in time.
* When cleaning the liner, pay attention to safety and avoid damaging the mirror stainless steel surface.
* Optional embedded printer or RS-485 Communication interface, please follow the corresponding instructions.
* Do not use the device outside the Temperature range of 5~ 40 ° C.
