Overview
JINGHONG RQH-350 Artificial climate box is a device used to simulate natural environment conditions. It is widely used in microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation and insect and small animal feeding, etc., and can accurately simulate temperature changes during the day and night.
Features
1. Mirror stainless steel liner, four corners and a half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean in the box.
2. Double door structure, good insulation performance. The inner door is a fully tempered Glass door, which does not affect the temperature in the box when observing the situation in the box.
3, Microcomputer program control temperature, Illumrination degree, can simulate day and night temperature and Illumrination degree changes.
4, with over-temperature alarm system, beyond the set temperature that emits sound and light alarm and cut off the heating system to ensure the safe operation of equipment.
5. Fluorine-free design, equipped with professional LED Illuminant lighting, effective, energy saving, promote emission reduction.
6. Set temperature, Humidity, Illumrination degree control in one. Using 30-segment programmable controller, it can simulate the natural climate as much as possible.
7. Can be equipped with embedded printer or RS-485 Communication interface for real-time monitoring of experimental process or recording experimental data. (optional)
Principle
The device uses a microcomputer program controller to precisely program the temperature, Humidity and Illumrination degree in the box. Through heating, cooling, humidification and LED Illuminant system, the required day and night temperature, Humidity and light cycle are simulated to create a specific artificial climate environment.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect and small animal feeding
Steps
1. Turn on the power supply (AC 220V 50Hz).
2. Set the required temperature, Humidity, Illumrination degree and time program through the microcomputer control panel.
3. Put the sample to be fostered or tested on the shelf of the box.
4. Close the box door and start the equipment operation program.
5. During operation, the inside of the box can be observed through the inner door of the Glass.
6. After the experiment, remove the sample and clean the inside of the cabinet.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Do not frequently open and close the box door, so as not to affect the internal environment Stability.
• Pay attention to the equipment Rated power (2700W) to ensure that the power supply line meets the requirements.
• If the over-temperature alarm is triggered during operation, please check and troubleshoot in time.
• When cleaning the liner, please disconnect the power first and wipe it with a soft cloth.
• Humidity controllable range is 50~ 90% RH, Fluctuation is +/- 5~ 7% RH, please pay attention when using.
• Embedded printer or RS-485 Communication interface is optional and can be configured on demand.
