Overview
JINGHONG GDHS-2050A low/high temperature test Chamber is a equipment for high and low temperature or heat and humidity environmental testing and testing in industrial and mining enterprises, laboratories, R & D institutions, etc.
Features
1, the use of 304 stainless steel liner, surrounded by semi-circular arc easy to clean, adjustable shelf spacing.
2. Adopt French "Taikang" fully enclosed Compressor, stable and reliable operation.
3. Adopt a microcomputer temperature controller, with dual digital display for setting and measuring temperature and PID self-tuning functions, providing accurate and reliable temperature control.
4. The air duct circulation system is composed of low-noise German imported fans and suitable air ducts to ensure uniform temperature in the working room.
5. The refrigeration system uses environmentally friendly working fluids to effectively reduce energy consumption and promote energy conservation and emission reduction.
6. There is a 25mm diameter test hole on the left side of the box, which can be used for external test power and signal wires.
7, with over-temperature alarm system, sound and light alarm prompt the operator to ensure the safe operation of the experiment.
8. With comprehensive safety device protection, it has protective functions for Compressor overheating, fan overheating, Compressor overpressure, phase loss, overload, overtemperature, humidifier water shortage, humidifier dry burning, etc.
9. GDHS series is equipped with programmable LCD controller.
10. An optional embedded printer can print and record the temperature at different times, making it convenient to check the temperature control of the whole process.
Principle
The equipment sets the target temperature through the microcomputer temperature controller, drives the refrigeration system (using the French Taikang fully enclosed Compressor) and the heating system, and makes the air in the box forced convection through the air duct circulation system (driven by the German imported fan), so as to achieve the rapid rise and fall of the studio temperature and uniform distribution, to simulate the required high and low temperature or heat and humidity environment.
Applications
Industrial and mining enterprises, laboratories, R & D institutions
Standards
GB/T2423.1-2001、GB/T2423.2-2001、GB/T2423.3-1993、GB/T2423.4-1993、GB-10592-89
Steps
Place the device in a suitable working environment (temperature 15~ 30 ° C) and connect the power supply (380V/50HZ).
2. Set the required temperature, Humidity and other test parameters through the programmable LCD controller.
3. If an external test line is required, the test hole on the left side of the box can be used.
4. Start the equipment and run the test.
5. During the test, real-time data can be observed through the controller, and the equipment is equipped with sound and light alarm functions such as over-temperature.
6. After the test, turn off the equipment and remove the sample.
7. The optional embedded printer can print and record temperature data for inquiry.
Notice
Equipment should be installed at the required Ambient Temperature (15~ 30 ℃).
• Power supply voltage is 380V/50HZ.
Safety protection function of the equipment, in case of alarm, please check and troubleshoot in time.
• When using an external test line, pay attention to the sealing of the test hole.
• Regularly clean the stainless steel liner to keep the equipment in good condition.
• Compressor, fan and other key components have overheating protection, non-professionals should not disassemble and repair without authorization.
