Overview
JINGHONG GDHS-2050B low/high temperature test Chamber is a equipment for high and low temperature or heat and humidity environmental testing and testing in industrial and mining enterprises, laboratories, R & D institutions, etc.
Features
1, the use of 304 stainless steel liner, surrounded by semi-circular arc easy to clean, adjustable shelf spacing.
2. Adopt French "Taikang" fully enclosed Compressor, stable and reliable operation.
3. Microcomputer temperature controller, with dual digital display for setting and measuring temperature and PID self-tuning function, accurate and reliable temperature control.
4. The air duct circulation system is composed of low-noise German imported fans and suitable air ducts to ensure uniform temperature in the working room.
5. The refrigeration system uses environmentally friendly working fluids to effectively reduce energy consumption and promote energy conservation and emission reduction.
6. There is a 25mm diameter test hole on the left side of the box, which can be used for external test power and signal wires.
7, with over-temperature alarm system, sound and light alarm prompt the operator to ensure the safe operation of the experiment.
8. With comprehensive safety device protection, it has protective functions for Compressor overheating, fan overheating, Compressor overpressure, phase loss, overload, overtemperature, humidifier water shortage, humidifier dry burning, etc.
9. GDHS series is equipped with programmable LCD controller.
10. An optional embedded printer can print and record temperatures at different times, making it easy to check the temperature control of the entire process.
Principle
The equipment sets the target temperature through a microcomputer temperature controller, drives the refrigeration system (using a French Taikang fully enclosed Compressor) and the heating system to work, and makes the air in the working room forced to circulate through the air duct circulation system (composed of low-noise fans imported from Germany and suitable air ducts), so as to achieve rapid and uniform temperature changes to simulate the required high and low temperature or heat and humidity environment.
Applications
Industrial and mining enterprises, laboratories, R & D institutions
Standards
GB/T2423.1-2001、GB/T2423.2-2001、GB/T2423.3-1993、GB/T2423.4-1993、GB-10592-89
Steps
Place the device in a suitable working environment (temperature 15~ 30 ° C) and connect it to a 380V/50HZ power supply.
2. Set the required temperature, Humidity and other test parameters through the programmable LCD controller.
3. If an external test line is required, the 25mm diameter test hole on the left side of the box can be used.
4. Start the equipment and run the test.
5. Humidity can be observed through the controller during the test, and the sound and light alarm system will be activated when the temperature is exceeded.
6. After the test is completed, turn off the equipment.
7. The optional embedded printer can print and record temperature data for inquiry.
Notice
Equipment should be installed at the required Ambient Temperature (15~ 30 ℃).
• Power supply voltage is 380V/50HZ.
Safety protection function of the equipment, in case of alarm, please check and troubleshoot in time.
• When using the test hole to connect the external circuit, please pay attention to sealing, so as not to affect the environment in the box.
• Regularly clean the stainless steel liner to keep the equipment in good condition.
• Compressor and other key components have multiple protections such as overheating and overpressure. Non-professionals should not disassemble and repair without authorization.
