Overview
JINGHONG GDHS-2050C low/high temperature test Chamber is a equipment for high and low temperature or heat and humidity environmental testing and testing in industrial and mining enterprises, laboratories, R & D institutions, etc.
Features
1, the use of 304 stainless steel liner, surrounded by semi-circular arc easy to clean, adjustable shelf spacing.
2. Adopt French "Taikang" fully enclosed Compressor, stable and reliable operation.
3. Microcomputer temperature controller, with dual digital display for setting and measuring temperature and PID self-tuning function, accurate and reliable temperature control.
4. The air duct circulation system is composed of low-noise German imported fans and suitable air ducts to ensure uniform temperature in the working room.
5. The refrigeration system uses environmentally friendly working fluids to effectively reduce energy consumption and promote energy conservation and emission reduction.
6. There is a 25mm diameter test hole on the left side of the box, which can be used for external test power and signal wires.
7, with over-temperature alarm system, sound and light alarm prompt the operator to ensure the safe operation of the experiment.
8. Comprehensive safety device protection has protective functions for Compressor overheating, fan overheating, Compressor overpressure, phase loss, overload, overtemperature, humidifier water shortage, humidifier dry burning, etc.
9. GDHS series is equipped with programmable LCD controller.
10. An optional embedded printer can print and record the temperature at different times, making it convenient to check the temperature control of the whole process.
Principle
The equipment sets the target temperature through the microcomputer temperature controller, drives the refrigeration system (using the French Taikang fully enclosed Compressor) and the heating system, and makes the air in the working room forced convection through the air duct circulation system (driven by the German imported fan), so as to achieve rapid and uniform temperature change and control to simulate the required high and low temperature or heat and humidity environment.
Applications
Industrial and mining enterprises, laboratories, R & D institutions
Standards
GB/T2423.1-2001、GB/T2423.2-2001、GB/T2423.3-1993、GB/T2423.4-1993、GB-10592-89
Steps
1. Connect the power supply (380V/50HZ).
2. Set the required temperature, Humidity and other test parameters through the programmable LCD controller.
3. Put the sample to be tested on the shelf in the studio.
4. Start the equipment and run the test program.
5. Humidity can be monitored in real time through the controller display screen during the test.
6. After the test, remove the sample and turn off the power of the equipment.
Notice
Equipment should operate at Ambient Temperature 15~ 30 ℃.
• Power supply voltage is 380V/50HZ before use.
Safety protection function of the equipment, in case of alarm, please check the cause in time.
• Regularly clean the stainless steel liner to keep the equipment in good condition.
• The humidifier needs to ensure water supply to prevent dry burning.
• When conducting external testing, you can use the test hole on the left side of the box to connect the cable.
