Overview
The SANFA LHP-250E Constant Temperature and Humidity Incubator is a device with a precise temperature and humidity control system that provides a variety of environment simulation conditions required for industrial research and biotechnology testing. It uses environmentally friendly refrigerants and fluorine-free designs, and is energy efficient, uniform temperature distribution, and long service life.
Features
1. Microcomputer LCD temperature and humidity controller, accurate and reliable temperature and humidity control, with over-temperature, leakage, power failure, Sensor fault alarm function
2. Fluorine-free design, high efficiency, low energy consumption, uniform temperature distribution, long service life
3. Mirror stainless steel liner, four corners and half arc design, easy to clean, adjustable shelf spacing
4. High Accuracy and Large Capacity Humidity Generator, Fast Humidity Control Response, High accuracy and Small fluctuation
5. The box door is equipped with an observation window, and the box is equipped with lighting to facilitate the observation of foster objects
6. With multiple protection functions: over temperature, Sensor failure, leakage, shutdown protection, door opening protection, water shortage alarm, call recovery
7. Independent temperature limit alarm system, automatic interruption if the temperature exceeds the limit (optional)
8. Can be connected to a printer or equipped with RS-485 interface to record temperature and humidity parameters (optional)
9. The left side of the box is equipped with a test hole, which is convenient for experimental operation and temperature measurement (optional)
10. Equipped with built-in humidifier (optional)
11. Smart Touchscreen Controller, Programmable Control
12. Built-in ultrasonic humidifier, optional RS-485 interface and embedded printer
Principle
The Constant Temperature and Humidity Incubator precisely adjusts the temperature and humidity in the box through a microcomputer control system, uses environmentally friendly refrigerants to achieve efficient cooling, and has a built-in ultrasonic humidifier to control humidity to ensure a stable environment in the box. Multiple protection systems monitor the operating status of the equipment in real time to ensure the safe conduct of experiments.
Applications
Industrial research, biotechnology testing, aseptic testing, stability inspection, industrial product raw material performance testing, product Encasement life testing, Spinning & weaving, Food processing
Steps
1. Turn on the power supply and set the required temperature and humidity parameters
2. Adjust the shelf spacing as needed
3. Place a foster or test sample
4. Set the timing time (1-9999 minutes)
5. Start the device running
6. Monitor the situation in the box through the observation window and lighting
7. Turn off the device after the experiment
