Overview
SANFA LHP-300E Constant Temperature and Humidity Incubator is a precise control of temperature and humidity equipment, providing environment simulation conditions for industrial research and biotechnology testing, suitable for aseptic testing, stability inspection and industrial product raw material performance, Encasement life and other tests.
Features
1. Microcomputer LCD temperature and humidity controller, accurate and reliable temperature and humidity control, with over-temperature, leakage, power failure, Sensor fault alarm function.
2. Adopting a fluorine-free design, it offers high efficiency, low energy consumption, uniform temperature distribution, and long service life.
3. Mirror stainless steel liner, four corners and half arc design, easy to clean, adjustable shelf spacing.
4. High Accuracy and large capacity humidity generator, humidity control fast, high accuracy, small fluctuation.
5. The box door is equipped with an observation window and lighting, which is convenient for observing the foster.
6. With over temperature, Sensor failure, leakage, shutdown protection, door opening protection, water shortage alarm, call recovery function.
7. Optional independent temperature limit alarm system, printer or RS-485 interface, test hole on the left side of the box, built-in humidifier.
8. Smart Touchscreen controller, programmable control, humidity fluctuation +/- 5% RH, built-in ultrasonic humidifier.
Principle
The Constant Temperature and Humidity Incubator precisely adjusts temperature and humidity through a microcomputer controller, uses environmentally friendly refrigerants and fluorine-free designs to achieve efficient energy consumption and uniform temperature distribution, and a built-in humidity generator ensures fast and stable humidity control. It supports a variety of protection functions to ensure experimental safety.
Applications
Spinning & weaving, Food processing and other aseptic test, stability inspection, industrial product raw material performance test, product Encasement life test
Steps
1. Connect the power supply to ensure that the Ambient Temperature is within the range of 5~ 35 ° C.
2. Set the required temperature range 0~ 60 ℃ and humidity range 50~ 90% RH through the microcomputer controller.
3. Adjust the shelf spacing and place the foster.
4. Start the device, monitor the temperature and humidity parameters, and optional recording function.
5. After the experiment is completed, turn off the power and clean the liner.
Notice
• Ensure that the Working Ambient Temperature is between 5 and 35 ° C.
• Power frequency is 220V 50Hz before use.
• Avoid over-temperature operation and pay attention to the alarm function.
• Clean the liner regularly to maintain hygiene.
• Optional functions need to be configured according to actual needs.
