Overview
The SANFA LHP-400E Constant Temperature and Humidity Incubator is a device with a precise temperature and humidity control system that provides a variety of environment simulation conditions required for industrial research and biotechnology testing. It is designed with environmentally friendly refrigerants and is suitable for aseptic testing, stability inspection, and industrial product raw material performance and Encasement life testing.
Features
1. Microcomputer LCD temperature and humidity controller, accurate and reliable temperature and humidity control, with over-temperature, leakage, power failure, Sensor fault alarm function.
2. Fluorine-free design, high efficiency, low energy consumption, uniform temperature distribution, and long service life.
3. Mirror stainless steel liner, four corners and a half arc, easy to clean, adjustable shelf spacing.
4. High Accuracy and large capacity humidity generator, humidity control fast, high accuracy, small fluctuation.
5. The box door is equipped with an observation window, and the box is equipped with lighting, which is convenient for observing the foster.
6. With over temperature, Sensor failure, leakage, shutdown protection, door opening protection, water shortage alarm, call recovery function.
7. Independent temperature limit alarm system, automatic interruption beyond the limit to ensure experimental safety (optional).
8. Can be connected to a printer or equipped with an RS-485 interface to record changes in temperature and humidity parameters (optional).
9. The test hole on the left side of the box is convenient for experimental operation and temperature measurement (optional).
10. Built-in humidifier (optional).
11. Smart Touchscreen controller, programmable control, humidity fluctuation +/- 5% RH, built-in ultrasonic humidifier, optional RS-485 interface and embedded printer.
Principle
The Constant Temperature and Humidity Incubator precisely adjusts temperature and humidity through a microcomputer controller, using equilibrate Conditioning mode, combined with environmentally friendly refrigerants and high-efficiency humidity generators, to achieve fast and stable environment simulation. Built-in Sensor real-time monitoring parameters ensure uniform distribution of temperature and humidity and fluctuation control.
Applications
Industrial research, biotechnology testing, aseptic testing, stability inspection, industrial product raw material performance testing, product Encasement life testing, Spinning & weaving, Food processing
Steps
Connect the power supply (220V 50Hz).
2. Set the required temperature (0~ 60 ° C) and humidity (40~ 95% RH) through the smart Touchscreen controller.
3. Adjust the shelf spacing (adjustable).
4. Place the foster on the shelf.
5. Start the device, monitor the temperature and humidity parameters, and optional recording function.
6. After the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be maintained at 5~ 35 ℃.
• Avoid over-temperature operation and pay attention to the status of the independent temperature limit alarm system (optional).
• Regularly check Sensor and Humidifier functions to prevent malfunctions.
• Pay attention to the protection function when the box door is opened to avoid affecting the temperature and humidity stability after opening the door for a long time.
• When there is a lack of water, deal with the alarm in time to ensure normal humidification.
• Use appropriate tools when cleaning to avoid damage to the mirror stainless steel liner.
