Overview
SANFA LHP-160EB Constant Temperature and Humidity Incubator is a precise control of temperature and humidity equipment for industrial research, biotechnology testing provides the required environment simulation conditions, suitable for aseptic testing, stability inspection and industrial product raw material performance, Encasement life and other tests.
Features
1. Microcomputer LCD temperature and humidity controller, accurate and reliable temperature and humidity control, with over-temperature, leakage, power failure, Sensor fault alarm function.
2. Adopting a fluorine-free design, it offers high efficiency, low energy consumption, uniform temperature distribution, and long service life.
3. Mirror stainless steel liner, four corners and half arc design, easy to clean, adjustable shelf spacing.
4. High Accuracy and large capacity humidity generator, humidity control fast, high accuracy, small fluctuation.
5. The box door is equipped with an observation window and lighting, which is convenient for observing the foster.
6. With over temperature, Sensor failure, leakage, shutdown protection, door opening protection, water shortage alarm, call recovery function.
7. Optional independent temperature limit alarm system, automatic interruption beyond the limit to ensure safety.
8. Optional connection to printer or RS-485 interface to record temperature and humidity parameters.
9. Optional test hole on the left side of the box, which is convenient for experimental operation and temperature measurement.
10. Optional built-in humidifier.
11. Smart Touchscreen controller, programmable control, humidity fluctuation +/- 5% RH, built-in ultrasonic humidifier.
Principle
The Constant Temperature and Humidity Incubator precisely adjusts temperature and humidity through a microcomputer controller, uses environmentally friendly refrigerants and fluorine-free designs to achieve efficient cooling, and a built-in humidity generator quickly controls humidity to ensure a stable and uniform environment in the box to meet experimental needs.
Applications
Industrial research, biotechnology testing, aseptic testing, stability inspection, industrial product raw material performance testing, product Encasement life testing, Spinning & weaving, Food processing
Steps
Connect the power supply (220V 50Hz).
2. Set the required temperature and humidity parameters through the smart Touchscreen controller.
3. Optional programming control mode for complex experimental settings.
4. Place the sample on an adjustable spacing shelf.
5. Start the device, monitor temperature and humidity changes, and optionally connect the printer to record data.
6. After the experiment, turn off the power and clean the liner.
Notice
• Ensure that the Working Ambient Temperature is within the range of 5~ 35 ° C.
• To avoid over-temperature operation, an independent temperature limit alarm system can be selected to prevent accidents.
• Regularly check Sensor and Humidifier functions to prevent malfunctions.
• Use a soft cloth to wipe the mirror stainless steel liner when cleaning.
• Pay attention to the protection function when the door is opened to avoid affecting the temperature and humidity by opening the door for a long time.
• When there is a lack of water, deal with the alarm in time to ensure normal humidification.
• Optional functions such as RS-485 interface or printer need to be connected and used correctly.
