Overview
GMP-160E light Chamber is a smart environment simulation equipment, which is widely used in the fields of microbial tissue cell fostering, seed germination, seedling test, plant cultivation, and insect and small animal feeding. It can accurately simulate different environment climate conditions, and is an ideal device for R & D institutions to engage in thermostatic, constant humidity and light experiment fostering.
Features
1. Using microcomputer to control temperature and Humidity, the control is stable and accurate.
2. Humanized touch buttons, large-screen LCD display, intelligent program control temperature, Humidity, lighting, menu operation, multiple parameters are displayed on the same screen.
3. Mirror stainless steel liner, four corners and half arc design, easy to disinfect and clean, Shelf can be adjusted arbitrarily.
4. 30-segment program can be set to simulate the temperature, Humidity and light changes of nature during the day and night, and can also simulate multi-directional Illuminant. With automatic parameter storage and recovery function after power failure.
5. Equipped with energy-saving, environmentally friendly, non-thermal interference, long-life LED Illuminant, optional overhead flat lighting to ensure uniform absorption of Illuminant.
6. Appropriate air duct circulation system ensures uniform wind distribution in the workplace without harming plant seedlings.
7. Key components such as Compressor and circulating fan use brand products, which are safe and reliable.
8. Optional independent temperature limit alarm system to ensure experimental safety.
9. The upgraded type (E series) has a large-screen color screen display. Illumrination degree adopts light Sensor automatic detection and control to reduce errors. Optional SMS alarm system to notify faults in time.
10. Upgraded intelligent programmable model, more accurate temperature control, Illumrination degree, better protection, and optional RS-485 interface to connect printers and computers to record data.
11. The E series is an upgraded type, with an LCD touch control screen for intelligent control of temperature, Humidity and lighting, programmable control, built-in humidifier, optional RS-485 interface and embedded printer.
Principle
The light Chamber precisely regulates the temperature, Humidity and lighting conditions in the box through a microcomputer Control system. It uses components such as Compressors and circulating fans to achieve a stable Humidity environment, and simulates natural light changes through a programmable LED Illuminant system. Its air duct system ensures a uniform environment, and Sensors monitor and feed back data in real time to achieve accurate simulation and control of the foster environment.
Applications
Microbial tissue cell fostering, seed germination, seedling test, plant cultivation, insects, small animal feeding, colleges, laboratories, environment protection, agriculture, forestry and animal husbandry research
Steps
1. Turn on the power supply (220V 50Hz).
2. Perform menu operation through Touchscreen to set the required temperature, Humidity, Illumrination degree and program segment parameters.
3. Up to 30 programs can be set up, each with a time range of 1-9999 minutes, to simulate day and night changes.
4. Place the fosters on the liner Shelf and adjust the Shelf position.
5. Start the device and the system starts to run according to the set program.
6. During operation, various parameters can be observed through a large screen.
7. When the experiment is over or needs to be interrupted, shut down the equipment according to the procedures.
Notice
The Ambient Temperature of the equipment is recommended to be between 5 and 35 degrees Celsius.
Temperature range is 10~ 50 ℃ when there is light, and 5~ 50 ℃ when there is no light.
Note that the input Power of the device is 1500W to ensure the load capacity of the power supply.
When cleaning and disinfecting the studio, pay attention to the use of its four-corner and half-arc design.
Optional functions such as temperature limit alarm, SMS alarm, Interface and printer, please confirm the configuration according to actual needs.
When running for a long time, the two sets of original imported hermetic Compressors selected for the E series will automatically switch work in turn.
