Overview
SANFA DHG-9023 Benchtop blast drying oven is a drying equipment suitable for industrial and mining enterprises, laboratories, R & D institutions and other places, for drying, baking melted wax, sterilizing and other functions. The box is made of good steel plate welding, the surface is electrostatic spraying, the studio adopts high temperature spray silver paint liner, equipped with microcomputer intelligent LED display temperature control instrument.
Features
1. The inside and outside of the box are welded with good steel plates, the surface is electrostatically sprayed, and the working room is sprayed with high temperature resistant silver paint, which is novel, beautiful and energy-saving.
2. Microcomputer intelligent LED display temperature controller, accurate and reliable temperature control, while displaying the set temperature and box temperature, with overheating, leakage, Sensor fault alarm function and timing function.
3. Adopt low-noise fan and suitable air duct to form a hot air circulation system, dry and hot air directly through the heated object for drying and sterilizing.
4. Optional upgraded liquid crystal display temperature controller, with programmable temperature control function, and can be equipped with RS-485 interface to connect the recorder and computer to record temperature parameter changes.
Principle
The drying oven precisely controls the heating system through a microcomputer intelligent temperature control instrument to generate heat. At the same time, the hot air circulation system composed of a low-noise fan and a suitable air duct forcibly circulates the dry hot air inside the studio, so that the hot air directly and evenly passes through the heated object, so as to achieve an efficient and uniform drying or sterilizing effect.
Applications
Industrial and mining enterprises, laboratories, R & D institutions
Steps
1. Place the device in a stable, well-ventilated position and connect it to a 220V 50Hz power supply.
2. Open the box door, place the items to be processed on the standard 2 shelves, and then close the box door.
3. Set the required temperature (RT + 10~ 200 ° C) and timing time (1~ 9999 minutes) through the microcomputer intelligent LED display temperature controller.
4. Start the equipment, the fan starts to work, the hot air circulation system runs, and the equipment works according to the set parameters.
5. During the working process, the situation in the box can be observed through the observation window, and the temperature controller will display the set temperature and the actual temperature in the box synchronously.
6. After the timing is over, the equipment stops heating, or you can manually turn off the power supply, and take out the items after the temperature in the box naturally chills down.
Notice
Equipment should be placed in a well-ventilated, drying and stable place for use.
• Do not dry flammable, explosive or corrosive items in the box.
• When placing items, do not block the outlet of the air duct in the box to ensure uniform hot air circulation.
• When the equipment is running and just after operation, the box and internal temperature are very high, do not touch it directly, and wear thermal insulation gloves when picking up and placing items.
• The equipment has alarm functions such as overheating and leakage. In case of alarm, the power supply should be cut off immediately to check the cause of the failure.
Before cleaning the equipment, be sure to cut off the power and wait for it to chill down completely.
• Please use the specified 220V 50Hz Power supply voltage, the input Power is 500W.
• Regularly check whether the power cord and plug are in good condition.
