Please contact customer service
Using PID light ion principle, detection range 0-200mg/m ³, resolution 0.1mg/m ³, built-in pump suction sampling distance over 10 Meters, Protection Rating IP65, with 100,000 Data storage and sound and light vibration alarm function.
Category : VOC Gas Detector
Brand : GaoPin
SKU : NB026038
Service :The delivery and service By NBCLab.Com
The NGP40-VOC-PID-N Multifunctional Gas detection Alarm Instrument is a Portable device for rapid detection of a variety of gas concentrations, Temperature and Humidity measurements and over-standard alarms. It uses 2.4 inch high definition color screen real-time display, based on PID light ions and other principles, equipped with professional circuits and kernel algorithms, can detect gases in pipelines, confined spaces or atmospheric environments, support gas leak detection and high concentration single gas purity analysis, detect more than 1000 gas types.
1. With waterproof splash, dustproof, explosion-proof, shockproof functions, using intrinsically safe circuit design, anti-static, anti-electromagnetic interference. 2. Protection level IP65, built-in water vapor, dust Filter, protect Sensors and instruments. 3. Built-in pump suction measurement, Response is fast, sampling distance is greater than 10 meters, special gas path design can directly detect negative pressure or positive pressure -0.5~ 2 kg of gas. 4.2.4 inch high definition color screen displays real-time concentration, alarm, time, temperature, Humidity, storage, communication, power, charging status and other information, and the menu interface adopts high definition simulation icons. 5. Large capacity Data storage function, standard 100,000 data storage capacity, support real-time, timing or only store alarm Data storage, can upload computer analysis through USB interface. 6. USB charging interface, compatible with computer, power bank or mobile phone charger, with overcharge, overdischarge, overvoltage, short circuit, overheating protection, 5-level accurate power display, support USB hot swap, charging can work normally. 7. Using 4500mA large-capacity rechargeable polymer battery, it can work continuously for a long time. 8. Support sound and light, vibration, vision, under-voltage, fault and other multi-directional three-dimensional alarm, alarm value can be set, Alarm mode can be selected low alarm, high alarm, interval alarm, weighted average alarm. 9. High Accuracy Humidity measurement (optional), while the Sensor temperature compensation, Temperature range -40~ 60 degrees, can detect 400 degrees gas (higher temperature can be customized optional). 10. It can simultaneously detect 1-4 kinds of gases (optional), and the units can be switched freely. Conventional gases do not need to enter molecular weight, and special gases automatically calculate and switch units. 11. Three display modes can be switched: simultaneously display four gas concentrations, large font cycle display single channel concentration, real-time Linear dispersion, support automatic or manual cycle. 12. The Chinese and English interfaces are optional, the default Chinese interface provides concise operation prompts. 13. With data recovery function, you can choose to restore or restore all. 14. Zero automatic tracking, long-term use is not affected by zero drift. 15. The target point is calibrated at three levels to ensure measurement Linearity and accuracy, in line with national standards and local Measurement Bureau standards. 16. Automatic identification and prevention of concentration calibrating errors. 17. Supports real-time or timed detection, and the pump can be turned off to extend the startup time. 18. It can record calibrating logs, maintenance logs, fault resolution measures, and provide Sensor life expiration reminders and next concentration calibrating time reminders.
The detection alarm instrument adopts the detection principle of PID light ion, through the built-in pump suction Sampling method Rapid Response, combined with professional circuit design and mature core algorithm processing, to achieve accurate measurement of gas concentration. The instrument has the function of temperature compensation to ensure the detection accuracy in different environments, and the Linearity and accuracy of measurement are guaranteed by the three-stage calibrate of the target point.
Chemical, Petroleum, Pharmaceutical, Environmental Flue Gas Analysis, Pipeline, Boiler Gas Analysis, Air Treatment and other occasions where gas concentration needs to be detected.
Exia IIC T4 GA、IP65
1. After booting, operate the instrument through 2.4-inch high definition color screen and 5 buttons. 2. Select the detection mode: real-time detection or timing detection (for the small amount of gas to be measured). 3. Set the alarm value and Alarm mode (such as low alarm, high alarm, interval alarm, etc.). 4. Gas sampling, built-in pump suction measurement can support greater than 10 meters distance. 5. View real-time concentration, Humidity and other data, and display relevant information on the screen. 6. Data storage: can be set to the open state, set the storage time interval, support local view, delete or export through USB. 7. calibrate: calibrate the target point three times, the instrument will prevent misoperation. 8. After use, it can be charged through the USB port, and it can work normally during charging.
• Instrument Protection Rating is IP65, but avoid long-term immersion in water. • Ensure that the built-in Filter functions properly when used in high Humidity or high dust environments. • When detecting high temperature gas, choose high temperature sampling cooling filtrate handle or high temperature and high humidity pretreatment system. • Use a compatible computer, power bank or mobile phone charger when charging, and avoid using substandard charging devices. • Regularly check Sensor life and replace or calibrate as prompted. • The storage function is turned off by default, please turn it on manually if you want to use it. • Avoid long-term use in extreme temperatures (beyond the range of -40 ° C to + 60 ° C) or Humidity conditions to prevent affecting the performance of the instrument. • The instrument is intrinsically safe explosion-proof equipment, but it still needs to be used in an environment that meets explosion-proof requirements. • Pay attention to the alarm state during operation and deal with the gas exceeding the standard in time.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
