Overview
SANSHEN YM75FN Vertical Pressure Steam Autoclave is a durable device made of stainless steel with microcomputer program control for sterilizing needs in medical, laboratory and other fields. The device ensures reliable sterilizing through precise temperature and pressure control and is equipped with a variety of Safety protection measures.
Features
1. Made of stainless steel, it is durable.
2. Lightly open the flip structure, the upper cover automatically bounces up, and the operation is labor-saving.
3. The control panel is designed with a beveled surface for easy observation and operation.
4. Microcomputer program control, automatically complete the process of discharging cold air, heating, insulation timing and pressure relief.
5. LED digital tubes and indicator lights dynamically display the operating status of the device.
6. The computer board has PID function, through self-tuning correction of heating parameters, the temperature control accuracy reaches +/- 0.5 ℃, which can prevent flushing.
7. With low water level control function, when the water level is insufficient, the heating will be automatically stopped and there will be instructions.
8. With "domestic circulation" function, no steam is released into the room.
9. When the temperature exceeds the set value of 2 ° C, the heating will be automatically stopped and the sound and light alarm will be issued.
10. When the overpressure reaches 0.17 MPa, the safety valve automatically releases steam to protect the equipment.
11. Do not open the lid when there is pressure in the Autoclave cavity to ensure safety.
12. No heating if the lid is not closed in place, and LED lights are indicated.
13. The safe state of the pressure in the device is indicated by LED lights.
14. The drain valve can discharge the condensed water in the bucket to prevent scaling.
15. Universal casters with brakes, easy to shift and easy to position.
16. Adopt immersion electric heating tube, high thermal efficiency.
Principle
The Autoclave controls the entire sterilizing process through a microcomputer program. First, the cold air is automatically discharged, and then the distillation water or purified water is heated by an immersion electric heating pipe to produce high-temperature saturated steam. Operating temperature (e.g. 126 ° C) and pressure are maintained under the precise control of the PID function to achieve the sterilizing effect. After sterilizing is completed, the system is programmed to relieve pressure.
Applications
Medical, laboratory
Steps
1. Check the water level and make sure distillation or purified water is used.
2. Put the items to be sterilized into the sterilizing chamber.
3. Close the top cover and ensure it is in place.
4. Operating temperature and sterilizing time through the control panel.
5. Start the device, and the microcomputer will automatically control the sterilizing program.
6. After sterilizing, wait for the pressure safety instruction before opening the lid to take out the item.
7. Regularly discharge condensed water through the drain valve.
Notice
• Must use distillation or purified water as the medium.
• Ensure chilled down water pressure ≥ 0.2MPa.
• When the lid is not closed in place, the device will not heat, please pay attention to the indicator light status.
• During the sterilizing process, if the temperature exceeds the set value of 2 ° C or the pressure exceeds 0.17MPa, the equipment will automatically protect and alarm.
• When there is pressure in the cavity, it is strictly forbidden to forcibly open the lid.
• Pay attention to the low water level prompt and replenish water in time.
• When moving the device, use the universal caster with brakes and pay attention to positioning.
• Regularly discharge condensed water to prevent scaling from affecting equipment performance.
