Overview
SANSHEN DZ5Z stainless steel electric water distillation (automatic control) is a stainless steel distillation water equipment with automatic water cut-off control function. The water output of the equipment can reach more than 5 liters per hour, Power is 4.5 kW, suitable for 220V/50Hz power supply.
Features
1. The whole machine is made of good stainless steel.
2. The coil condensing structure is adopted, which has good chilling down effect and large water output.
3. The chilled down water can be returned to the evaporation bucket, which helps to save water resources.
4. Equipped with a drain valve, it can discharge condensed water in the bucket, which helps to improve the scaling conditions.
5. Adopt copper immersion heating pipe, high thermal efficiency and long service life.
Principle
The equipment heats the water in the evaporation bucket through a copper immersion heating pipe to produce water vapor. The water vapor is chilled down through the coil condensation structure and condensed into distillation water. The chilled down water can be returned to the evaporation bucket for domestic circulation. The equipment has the function of automatic water cut-off control to ensure safe operation.
Applications
Laboratory, medical, chemical, scientific research
Steps
1. Check the power supply and water connection of the equipment.
2. Inject an appropriate amount of raw water into the evaporation bucket.
3. Turn on the power supply and start the equipment for heating distillation.
4. During the operation of the equipment, condensed water can be discharged through the drain valve.
5. Collect the distillation water produced.
6. After use, turn off the power and empty the device.
Notice
The device needs to be connected to a power supply that meets the requirements (220V/50Hz).
• Ensure that the water supply is normal and avoid equipment operating in a state of water shortage.
• Regularly discharge condensed water through the drain valve to reduce scale accumulation.
• Please pay attention to high temperature parts during operation to avoid burns.
• When the equipment is not in use, it is recommended to empty the internal water.
