Overview
SANSHEN YX600W horizontal circular pressure steam Autoclave is a durable sterilizing device with a stainless steel body. It is automatically controlled by a microcomputer throughout the process, with LED digital display and dual pressure and dual temperature monitoring functions, suitable for various scenarios that require efficient and safe sterilization.
Features
1. The body is made of stainless steel, which is durable.
2. Microcomputer automatic control of the entire process.
3. LED digital full display settings and dynamic temperature and timing values.
4. The water tank and sterilizing chamber adopt double pressure and double temperature display and control.
5. LED lights and alarm devices fully indicate the operating status of the equipment.
6. PID temperature control function, can automatically correct heating control parameters, prevent flushing temperature, temperature control accuracy +/- 0.5 ℃.
7. Over-temperature (set temperature + 2 ℃) alarm and stop heating.
8. With automatic water replenishment function, automatic treatment when water is short.
9. Safety valve overpressure protection.
10. Autoclave doors are equipped with electronic interlocking devices to ensure safety.
11. Self-expanding silicone rubber sealing ring has good sealing effect and long service life.
12. Equipped with drying function.
13. After the heat preservation, the exhaust steam mode can be selected to meet the pressure relief requirements of different sterilized substances.
Principle
The equipment generates high temperature and high voltage steam through electric heating, and uses a microcomputer Control system to automatically control the temperature, pressure and time of the sterilizing process. Its PID temperature control function can precisely adjust the heating, ensure the uniform and stable temperature of the sterilizing room, and achieve the purpose of effective sterilization.
Applications
Medical, laboratory, pharmaceutical, bioengineering
Steps
Check the power supply of the equipment (380V/50Hz three-phase five-wire system) and the water pressure (≥ 0.25MPa).
2. Put the items to be sterilized into the sterilizing room (size 450 * 920mm).
3. Set the sterilizing temperature (RT + 5~ 138 ℃) and time (1~ 99.59min/h) through the microcomputer control panel.
4. Start the equipment, the microcomputer will automatically control the entire sterilizing process, including heating, heat preservation and exhaust steam.
5. After sterilizing, you can choose the drying function or different exhaust steam methods according to your needs.
6. After the pressure drops to a safe range, open the Autoclave door through the electronic interlock device and remove the item.
Notice
• Please make sure to use a three-phase five-wire 380V/50Hz power supply with 7.5Kw Power.
• Before the equipment runs, it is necessary to confirm that the water replenishment pressure is not less than 0.25MPa.
• When the Autoclave door is not in place or locked, the equipment will not supply steam to work, please make sure the door is closed correctly.
• When there is pressure in the sterilized room, the door lock cannot be opened, and it is strictly forbidden to open it forcibly.
• Pay attention to observe the over-temperature alarm (set temperature + 2 ℃), the device will automatically stop heating.
• Regularly check the status of the self-expanding silicone rubber sealing ring to ensure the sealing effect.
• Dimension of the equipment is 100 * 60 * 140cm, please reserve enough installation and operation space.
