Overview
LANDTEK TM8816 series Ultrasonic Thickness Gauge is an integrated practical thickness gauge. Measurement range is 1.0~ 200mm. It is divided into two models: TM8816 and TM8816C, of which TM8816 resolution is 0.1mm. The shell is made of light and hard ABS plastic and uses ultrasonic Sensor, which is suitable for measuring the thickness of various ultrasonic conductors.
Features
1. With Strong Transmitting Power and High Broadband Receiving Sensitivity, it can adapt to Probe of different Frequencies, and can be measured on rough surfaces, lacquered surfaces, and even some gray cast iron with severe corrosion. The application range is almost all over the industrial industry.
2. Using the optional RS232C software and cable, it can communicate with a PC computer to achieve data acquisition, processing, analysis, and printing functions.
3. Using computer technology, ultrasonic technology and other professional technologies, the material thickness can be accurately measured.
4. When the battery voltage is lower than the specified value, it is automatically indicated.
5. Numbers show, ignoring the difference.
Principle
The thickness gauge uses ultrasonic technology to transmit and receive ultrasonic signals through the ultrasonic Sensor, and uses computer technology to process the signals to accurately measure the thickness of the material.
Applications
Thickness measurement and corrosion measurement of petroleum, shipbuilding, power station, machine manufacturing, Pressure Vessel, chemical equipment boiler, oil storage tank, etc. It can measure the thickness of any hard material, such as: steel, cast steel, aluminum, red copper, brass, zinc, quartz Glass, polyethylene (PE), polyvinyl chloride (PVC), gray cast iron, nodular cast iron, ceramic, plastic and Miscellaneous any ultrasonic good conductor thickness.
Steps
1. Install a 4 * 7 battery.
2. Select the Probe and Frequency.
3. Place the Probe on the surface of the tested material.
4. Read the digital display thickness value.
5. Optional use of RS232C cable to connect to PC for data communication.
Notice
* Ambient Temperature 0~ 40 ℃.
* Operating Relative Humidity is 10~ 90% RH.
Make sure the battery voltage is sufficient, and pay attention to the automatic indication when the voltage is low.
* Probe in good contact with the material surface during measurement.
* Avoid use in extreme environment conditions.
