Overview
The LS160A Portable Solar Film Tester is an instrument mainly used for the transmittance test of automotive solar film or building film. It can simultaneously test the infrared, ultraviolet blocking rate and visible light transmittance of materials (such as solar film, explosion-proof film, coating material and light-transmitting substances such as Coating). The infrared center wavelength is 1400nm, which is small in size and easy to carry around when going out.
Features
1. Compact in size, a true pocket product, easy to carry around.
2. Especially suitable for all kinds of film product testing (such as solar film testing, film light transmitance testing).
3. UV barrier rate meter, infrared barrier rate meter, visible light transmittance meter (light transmitance meter) three in one.
4. Simple operation, fast measurement, just put the test object into the test slot, and display the three test results at the same time.
5. Suitable for various film performance exhibition, production, Quality control, inspection and other occasions.
6.4 AAA alkaline dry battery power supply, ultra-low power consumption, and easy to replace.
Principle
The instrument irradiates the measured material through the built-in specific wavelength Illuminant (UV peak wavelength 365nm, visible peak wavelength 530nm, infrared peak wavelength 1400nm), and detects the light intensity after penetrating the material, thereby calculating the UV blocking rate, infrared blocking rate and visible light transmittance.
Applications
Automotive solar film test, architectural film test, film light transmitance test, explosion-proof film test, coating material test, Coating test, performance display exhibition, production, Quality control, inspection
Standards
The information does not mention
Steps
1. Turn on the instrument power.
2. Put the test object into the test tank.
3. The instrument will quickly measure and display the results of ultraviolet blocking rate, infrared blocking rate and visible light transmittance at the same time.
Notice
The thickness of the object to be measured should be less than 0.8mm.
• It is recommended to use 4 AAA alkaline dry batteries for power supply.
• This model (LS160A) is recommended for testing films with good reflection performance such as metal films and ceramic nano films.
• Measurement accuracy of +/- 2%.
